Hi! I have some troubles setting up bond on BCM57504 via S5224F-ON.
Network configuration:
auto lo
iface lo inet loopback
auto enp129s0f0np0
iface enp129s0f0np0 inet manual
auto enp129s0f1np1
iface enp129s0f1np1 inet manual
auto enp129s0f2np2
iface enp129s0f2np2 inet manual
auto...
Hi, I have a 13-node PVE custer connected via FC to storage.
I'm going to add another 4 PVE nodes as Ceph cluster storage.
I would like to know whether it is better to have separate 4 node Cluster with Ceph connected to the existing cluster as separate storage,
or should I add those 4 nodes with...
Here is error report, when it doesn't work:
Nov 4 09:58:08 pmg postfix/smtp[2812391]: B90D347EA8: to=<user@example.com>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=example.com type=AAAA: Host found but no...
Hi,
I have an IPVS direct routing Load Ballancer VM (LB) which works only when the target Backend VM (e.g. B1) is on the same cluster node.
If LB is on different node than Backend (B1), TCP connection between Client (CL) and Backend (B1) can not be established.
CL sends SYN packet to LB and LB...
I have exported an iSCSI LUN with multipath to a PBS server in the SAN.
How should I initialize this remote disk? It doesn't show up in drive list.
# lsscsi
[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0
[2:0:0:0] disk QEMU QEMU HARDDISK 2.5+ /dev/sda
[3:0:0:0]...
Hello. I've set up a cluster with physically separated cluster network but it is not doing what I expect it to do.
Here is my lab:
[node1 ~]# pvecm status
Cluster information
-------------------
Name: clustest
Config Version: 3
Transport: knet
Secure auth: on
Quorum...
Hello all!
I would like to ask for help with configuration of multipath on iSCSI disk in Proxmox 6.2.
I have configured multipath on the server:
[hp12 ~]# iscsiadm -m session
tcp: [1] 10.1.100.112:3260,22 iqn.2000-05.com.3pardata:20220002ac005aab (non-flash)
tcp: [4] 10.1.100.113:3260,121...
Hi, I have a PVE cluster where all nodes are connected to several SANs using multipath.
However one PV in LVM complains, that it is using one of the paths instead of multipath device:
[node5@15:35 ~]# pvdisplay
WARNING: PV 0tO1MK-jzPE-WKj4-RBi6-Ev9t-4Yvf-jXgNGF on /dev/sde was already found on...
HI, I have set up a VM with 2GiB of memory
[node6@09:31 ~]# qm config 108|grep mem
hotplug: disk,network,usb,memory,cpu
memory: 2048
[node6@09:32 ~]#
But the guest claims it has only 1GiB memory
Handle 0x1000, DMI type 16, 23 bytes
Physical Memory Array
Location: Other
Use...
Hello all,
may be a noobish question, but I have a fire on the roof (metaphorically).
We had a network issue, and all nodes stopped seeing each other at the same time.
After we resolved the network issue, all cluster nodes seem to be on their own:
# pvecm status
Quorum information...
Hello all,
I know this issue was covered several times on this forum, but my symptoms are a bit different.
I've used NFS storage for a few months but, now the storage shows offline in Proxmox GUI.
Although on 2 nodes out of three it is mounted and accessible when checked from command line.
Here...
Ihave tried to add a node2 to newly created cluster on node1 which failed:
[root@node2]# pvecm add node1
The authenticity of host 'node1 (10.0.0.1)' can't be established.
ECDSA key fingerprint is SHA256:aRIk8xO64eUL5RVX7uxy5BlIeg6EjtqKc7KWnKLruQE.
Are you sure you want to continue connecting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.