Search results

Re: How to NAT LAN to WAN? BTW: because proxmox webgui will overwrite post-up/post-down lines in /etc/network/interfaces when you change networking in webgui (see "Pending changes" area after editing in GUI) i wrote this little buddys: root@proxmox2:~# cat /etc/network/if-up.d/enable-nat...

Re: How to NAT LAN to WAN? My current network design: proxmox node: - eth0 connected to switch with internet access (world-reachable) - eth1 connected to switch with internet access (world-reachable) - bond0 includes both in active/backup mode - vmbr0 includes bond0 and has public IP - vmbr1...

Re: How to NAT LAN to WAN? Caution: Long Post! Short version for the lazy guys: I tried everything i know about NAT to get it going on my proxmox node but had to give up. As long as nobody has another clue what else to try, i'll keep using a KVM firewall system for managing VM traffic...

Re: How to NAT LAN to WAN? Many thanks for the fast answer, Dietmar! I have seen that part in wiki. If configured like that and s.th. in /etc/network/interfaces is changed via web-gui, it deletes those 3 lines as the diff shows in gui: - post-up echo 1 > /proc/sys/net/ipv4/ip_forward...

Re: How to NAT LAN to WAN? Hi all, i've installed & configured PVE 3.3 on a fresh Host and try to find the "best" networking/routing setup to a scenario like JBB descripes here. I like the "proxmox integrated firewall" feature but can't really unterstand why the Proxmox webgui doesn't let me...

hmm... Sorry, i just don't get it :-/ I've been thinking about your suggestion a while but i can't figure out how this could possibly help me?

I my case there's one Server that is housed in a remote datacenter, currently managing about 10 VMs (both KVM and OpenVZ). It is connected via 2 NICs and 1 remote management interface. I use bonding so i have a redundant link. I have no need for a hardware firewall because it's to expensive...

*bump* When can we expect a Firewall Feature in V2?

please see this thread: http://forum.proxmox.com/threads/6279-Proxmox-VE-2-x-firewall-option?highlight=Firewall It once was on the roadmap but has been removed some time ago.

Yes, i know that. same with older versions. This is where shorewall is placed on top. But it doesn't answer my question :(

Dear Proxmox Staff, thank you very much for creating this really cool software. I currently have v1.8 in use but managed to get a testing system for 2.0 today. Installation went smooth as expected, but i was really sad whe i had to realize there's no firewall feature included. At first i...

I'm really really happy you finally released V2.0! This thread is for all who want to say "thank you!" to you. Dear Proxmox Team: Thank you for your hard work. I really appreciate this!

My current network setup: - eth0 & eth1 forming bonding device "bond0" - virtual bridge "vmbr0" for my VMs (those which don't need to be accessable from "world") - shorewall firewall (on VE hardware) routing traffic between "world" and proxmox VE see my /etc/network/interfaces: # network...

Hi guys, a friend's server and my Proxmox VE are located in the same datacenter. i offered him a VM on my host for standby. so he set up a DRBD device between his host and VM (works fine) and a cluster IP that's configured to the active node using heartbeat. how must i configure shorewall to...

Thanks for sharing! I'll keep them in mind and wait for more suggestions to compare. Just to get it right: RAID-0 out of 3 Disks, 2 times, then mirror them (RAID-1), if 1 drive fails i'll have to redesign the Raidset or exchange the faulty device? The system is located in a professional...

Hi Everyone! I'm running Proxmox on a HP ProLiant DL360 G5 Server: Serial Number / Product ID: CZJ713035W / 399519-421 2x dual core xeon 3,2GHz 7 GB RAM 1x HW-Raid-Controller "Smart Array P600" 5x HDD (SAS, 146 GB, 10.000 RPM, Model HP DG146ABAB4, PHY Transfer Rate: 3.0GBPS) forming RAID 1+0...

Hi! i already tried it with ejecting, without success. Just created a new Device (both IDE and SCSI) and mounted the iso, without success, too. Any more ideas?

Hi! I'm trying to install Scientific Linux 6 using the DVD media "SL-60-x86_64-2011-03-03-Everything-DVD1.iso" and "SL-60-x86_64-2011-03-03-Everything-DVD2.iso". I downloaded it to my proxmox host, and icreated a new VM using DVD1 as installation media. Everything was fine until the...

so it seems i misconfigured my system. Thank you for clearing this out! BR, Heiner

Dear all, i installed RHEL6 as a KVM in proxmox and have problems accessing ttys in proxmox' vnc console: - pressing [Strg]+[Alt]+[F1] : doesn't work - pressing [Strg]+[Alt]+[F2] : doesn't work - pressing [Strg]+[Alt]+[F3] : doesn't work - pressing [Strg]+[Alt]+[F4] : doesn't work - pressing...