Hello guys,
with kernel 3.10.0-8-pve the Dell OMSA Storage didn´t get recognised.
with kernel 3.10.0-7-pve it worked.
What can I do ?
P.S.: I helped me now with megacli.
best regards
Mac
Hi guys,
I´m testing the new kernel on some of my Dell Servers and an IP-less bridge to a separate bond is not working.
The KVM´s boot up but thereis no ping from any KVM on this bridge.
Is this a known problem?
Thnx
Mac
Hello guys,
I had a problem last night. I have DRBD over 2x 10GB crossover links bonded with active-backup.
After I rebooted one host my DRBD had a WFConnection Problem. The Ping is also not working between the DRBD Interfaces.
After doing ifdown and ifup on my DRBD Interfaces the ping works...
Hello community,
I need an general advise howto tune the scheduler in proxmox for:
- Fibrechannel-SAN
- Local RAID-Controller SAS
- DRBD via 10GBE Intel
I thought I read somewhere to leave the default cfq-scheduler in production. But is that true for fast RAID-Controllers or DRBD.
Thanks for...
Hi guys,
after upgrading to the latest 2.3 I´m having the following problem:
On some of my Windows 2003 Guests I couldn´t get the balloon service working. I updated to the latest virtio drivers from fedora 0.1.59.
The driver installation works perfekt, also the blnsrv.exe -i works perfekt. But...
Hi guys,
I want to know if I could passtrough an existing LVM-Volume with 24TB XFS-Filesystem on it to a KVM-Guest.
And if that would be possible, could I also do a live migration to a different host ?
For Background-Info I use a shared FibreChannel SAN and this special Volume would be...
Hi guys,
is it possible to run pve-kernel in a debian-squeeze kvm-guest?
does it make sense..maybe yes 100Hz in guest is recommended.
thanks for you thouhgts
macday
Hi guys,
I just read in a thread here, that ionice(vzdump) and other features of proxmox are only working well with the cfq-scheduler.
But the drbd-wiki tell me, that drbd-devices should be set up with the deadline-scheduler and other tweaks.
What is the best-practise ?
thx
macday
Hi Proxmox-Team,
I have a question.
Why do I need a quorum if I have a 3-Node-Cluster where only on 2 Nodes are KVM´s (upon DRBD) and the 3rd Node ist just for Management (Multicast corosync and HA).
Thanks guys
macday
Hi guys,
have a little question. Could I do an 3-Node-DRBD-Cluster.
1st option with Dual-Port 10GB Nics connected in a row.
2nd option with a 10GB-Switch.
Another question...could I improve DRBD-Speed by bonding 2 10GB Ports with Balance-RR (online 2 nodes).
Thanks for your thoughts.
macday
Hi guys,
This weekend I updated my clutser to pvetest-repo to test the stable kvm 1.1
No I have just one problem when migrating one machine to another host.
Windows KVM´s are working after this "error" migration. Linux KVM´s (mostly debian squeeze) are crashing.
Any idea ?
cheers
macday
Hi guys,
I have a simple question.
I do have a 3-node cluster with shared SAN-Storage, 2.1 fresh install. I also have one Squeeze VM 32bit. After migrating this Machine from one node to the other the dmesg in the VM says "tsc clocksource unstable xx seconds". After fixing the time in the guest...
Hi guys,
I really need to know if I could update my PVE 1.9 Cluster with BRBD (and compiled DRBD-Tools just like the wiki) to 2.0
If you wish I could post some config-files.
Big thanks.
Hello,
I´m testing the new 2.0RC1 and mostly everything runs perfectly and fast.
Only one issue I could see so far with my Ubuntu-Client the TAB-Key is not working in the guest-console.
Thanks for your hard work.
Cheers
macday
Hi everyone,
I have some serious problems with the 1.9 release.
For years I ´m using proxmox and I passthroughed 1 Fritzcard USB 2.0 and an AGFEO PBX to a virtual Windows Server 2003 R2. After the update the machine crashed at boot or later when activating the usb-devices in windows.
The only...
Hi everyone,
I just want to report that "Using Tape Drives as SCSI pass through" http://pve.proxmox.com/wiki/Tape_Drives#Using_Tape_Drives_as_SCSI_pass_through_.28for_Linux_KVM_guests.29 now works with Windows, too. I´m so glad.
my config:
pve-manager: 1.7-12 (pve-manager/1.7/5490)
running...
Hello,
could somebody tell me why the tape method described here http://pve.proxmox.com/wiki/Tape_Drives with iSCSI target is not working with the 2.6.35 kernel. Is there any workaround this.
After upgrading to 2.6.35 the iSCSI target could not be started any more.
thanks for help
macday
Hi,
I have a question. Could I run XEN-Appliances with a guest XEN-Kernel in Proxmox?
I read about xenner. How could I get xenner working in Proxmox? I have ProxmoxVE 1.7 with kernel 2.6.35.
Thanks guys
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.