Search results

  1. L

    pve 8.0 and 8.1 hangs on boot

    On an asus I enabled the X2APIC opt-out to no avail. Tried with kernel 6.2 . I managed to get the system functionnal again after several trials and "errors". The following is more or less what worked for me: # 'lsblk' and 'fdisk -l' can help identify the partitions export lang=C export...
  2. L

    pve Linux 6.5.11-7-pve stucks "loading initial ramdisk..."

    Once in the Grub menu, I edited the rescue grub "script" and added "loglevel=7" to the "linux" line and added an echo "Initrd done" after the initrd line. On boot "Initrd done" was shown after "Loading initial ramdisk ..." so the ramdisk is loaded, but it does does not boot next? mkdir r #...
  3. L

    pve Linux 6.5.11-7-pve stucks "loading initial ramdisk..."

    My datacenter just intervened on my server and indicates that the boot is stuck on "Loading initial ramdisk". I tried both copies of the RAID. The server is an Asus machine. I am going to try and modify the kernel used (after checking which was the kernel on installation - I found...
  4. L

    [SOLVED] Is there a cluster bridge or cluster-level networking?

    @Theo70 - This is not exactly the topic of this thread. However, "bridge-ports <IFACE>" is the key. On a server in a datacenter I have: auto vmbr0 iface vmbr0 inet static address <STATIC_IP>/24 gateway <STATIC_GW> bridge-ports enp3s0f0 bridge-stp off...
  5. L

    [SOLVED] apache2.service: Failed to set up mount namespacing: Permission denied

    I created this script (for apache) to add the override to the systemd configuration. Easier to repeat on different servers. #!/bin/bash # run using sudo or root OVERRIDE_FILE=/etc/systemd/system/apache2.service.d/override.conf if [ ! -r "${OVERRIDE_FILE}" ] ; then mkdir -p "$(dirname...
  6. L

    [SOLVED] Is there a cluster bridge or cluster-level networking?

    This is a great feature. I setup a VXNET and to get it fully running on proxmox 8.1.3, I had to do a few things: 1. I added a firewall rule at the datacenter level to accept traffic related to the VXLAN. I probably should define an alias for the machines in the cluster and set that as the...
  7. L

    How to resize /dev/pve/data without breaking Proxmox?

    @kunus Thanks for sharing, still helpful today on Proxmox 8: ```bash resize2fs /dev/mapper/vg-data 100G e2fsck -f /dev/mapper/vg-data resize2fs /dev/mapper/vg-data 100G lvreduce -L100G /dev/mapper/vg-data resize2fs /dev/mapper/vg-data mount /var/lib/vz history ``` However, my ultimate goal...
  8. L

    lxc apparmor="DENIED" operation="mount" error=-13

    I am on Proxmox 8.0.3 after upgrading from an old version. I have these in my log and the machine has number 102, not 200. I wonder if it is getting messages for machine 200: 2023-07-19T17:10:41.454554+00:00 p2 kernel: [81220.449368] audit: type=1400 audit(1689786641.449:6432)...
  9. L

    [Solved] QDevice - service not starting on node

    I am trying to set up a qdevice node to a 2 node setup . I fixed some issues, and I am almost there but the last step fails: node 'p3': Importing cluster certificate and key node 'p3': pk12util: PKCS12 IMPORT SUCCESSFUL node 'p5': Importing cluster certificate and key node 'p5': pk12util...
  10. L

    "Migrating" without syncing disk (after node isolation)

    The machines that were concerened are ct:102 and ct:140. They both use replicated ZFS. Both of their ha-groups were empty after the failure. I can not guarantee that they were set before the failure, but in principle I checked all the settings before . The machines migrated to server p1 which...
  11. L

    "Migrating" without syncing disk (after node isolation)

    This just happened again for two machines. Their groups were "empty". I applied to procedure to manually remove the rootfs from '/etc/pve/nodes/<server>/lxc/*.conf for the machines in question. I then performed the "pct rescan -vmid <ID>" commands to reattache the disks. This attaches the...
  12. L

    "Migrating" without syncing disk (after node isolation)

    When a machine fails, recovery requires several tricks at least 50% of the time. I am using Proxmox VE 5.4-13 and a machine failed, was isolated, etc. Some machines properly migrated, but 3 are in a "difficult" state Two instances migrated to a machine that is not even in the HA cluster that...
  13. L

    IP for machine that was migrated still responding

    This looks similar to https://forum.proxmox.com/threads/turned-off-vm-still-respond-to-ping-and-ssh.25396/ but I am running "pve-manager/5.4-5/c6fdb264 (running kernel: 4.15.18-12-pve)" . Short description: a ping to the machine is still working even after shutting it down, but "ssh" is not...
  14. L

    pve-zsync backup + daily zfs snapshot

    I just discovered zfSnap and it works like a charm. I set it up when a reboot of one of the HA servers happened in the middle of a sync which messed up the entire database. I had to restore from the backup made 23 hours earlier and recover what I could frome the broken database. I added a...
  15. L

    [SOLVED] Restore failing due to ./lib/udev/devices/* ?

    Hi, I restored the data by extracting the backup manually and rsyncing it. I had to redo it with another machine and I confirm that unselecting "unprivileged" is the solution. Thank you Mario
  16. L

    [SOLVED] Restore failing due to ./lib/udev/devices/* ?

    Restore failing due to devices ? extracting archive '/mnt/pve/p3BackupFtp/dump/vzdump-lxc-105-2019_04_06-03_46_34.tar.lzo' tar: ./lib/udev/devices/ttyp0: Cannot mknod: Operation not permitted tar: ./lib/udev/devices/ptypb: Cannot mknod: Operation not permitted tar: ./lib/udev/devices/ptyp8...
  17. L

    VM Network is KO after backup

    The external network connection to/from a VM is not longer functionnal after a backup about 15% of the time. I am interested in any hint about how to avoid this. The backup of a Virtual machine (CT) running in a LXC container on LVM (in /var/lib/vz) breaks the network and Proxmox VE t 5.2-6 ...
  18. L

    error with cfs lock 'file-replication_cfg'

    I removed all synchronisations to p4 and I ended up with the normal display. The synchronisations did not appear as removed immediately - I guess that they were scheduled for removal.
  19. L

    error with cfs lock 'file-replication_cfg'

    I get the following error after manual migration of the virtual machines. I manage two servers and from time to time I have to manually move servers from one to the other for hardware maintenances (/repairs). I get this message in the "replication" view: error with cfs lock...
  20. L

    Migration failed (while replication seemed ok)

    I "fixed" my issues: - ZFS backup on server that did not have the designated virtual machine for safety: zfs snapshot <pool>/<disk>@now ( zfs send <pool>/<disk>@now | zfs receive <pool>/<disk>-backup ) & # When finished - destroy blocking zfs storage: zfs destroy -r <pool>/<disk> This...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!