Not sure what's going on. I have 3 nodes that all have the same issue with inplace upgrade.
root@prox-f:~# cat /etc/apt/sources.list
deb http://ftp.debian.org/debian stretch main contrib
# PVE pve-no-subscription repository provided by proxmox.com,
# NOT recommended for production use
deb...
I know this is long, but I have tried to include every command possible to help with troubleshooting.
I cannot systemctl start ceph-mon.<MON-ID>.service. It is not there.
I needed to upgrade from Hammer to Jewel in order to install a new node.
I've done this several times before. I am trying...
I have a weird problem here. 7 servers are configured the exact same way. 2 of them are stuck in round-robin mode for bond0. The two NICs are connected to 2 completely separate Netgear Switches.
prox-h:~# cat /etc/network/interfaces
# network interface settings; autogenerated
# Please do NOT...
I'm preparing my hosts to upgrade to 5.1
In preparation, my nodes need to be on CEPH 10.2.9 or higher.
So I apt-get update all of my machines to get them on the latest 4.4 before moving to 5.1. My 4 processing nodes update without problems. My nodes with CEPH are hanging on update at
Setting up...
After my upgrade following the wiki, all of the ownership permissions were changed to "ceph" user.
Now I have tons of emails daily with the following errors
/etc/cron.daily/logrotate:
error: ceph.logrotate:1 duplicate log entry for /var/log/ceph/ceph.audit.log
error: skipping...
I have 4 CEPH servers all run:
CPU(s) --> 24 x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (2 Sockets)
Kernel Version --> Linux 4.4.40-1-pve #1 SMP Wed Feb 8 16:13:20 CET 2017
PVE Manager Version --> pve-manager/4.4-12/e71b7a74
My Ceph.conf:
cat /etc/ceph/ceph.conf
[global]
auth client...
I received this error during a resize of LXC Mount Point:
Task viewer: resize
OutputStatus
Stop
2017-04-10 07:56:27.325140 7f1dd1994780 -1 did not load config file, using default settings.
Resizing image: 100% complete...done.
e2fsck 1.42.12 (29-Aug-2014)
Pass 1: Checking inodes, blocks, and...
I have two:
Netgear M7100-24x
I have 4 Supermicro Superservers with Dual 10Gb NICs (eth3 and eth4)
My switches are completely separate, and they both tie into the same vLAN. So they are on the same network without a cable connecting the two.
My server are in active/backup bonding modes for...
I am about to deploy a new cluster using 10gb Intel NIC.
Is it possible to have a single 10gb NIC and a single 1gb NIC in active-backup bond?
I want to get full 10gb throughput on the active and fail-over to 1gb on failure of primary NIC.
I am NOT looking for a way to get 11gb/s.
I want a 10gb...
I was under the impression, through several forum posts, that assigning Virtual Cores to KVM guests have zero (0) impact on KVM performance.
However, after a quick test, I show that there is a big difference when assigning the proper cores.
What is the general rule of thumb when assigning cores...
I noticed a red node this morning.
This is after some things went haywire with NFS shares failing in the middle of backups. The solution posted here works.
http://forum.proxmox.com/threads/10013-Cluster-Nodes-become-red-without-any-reason-once-a-week
The server was running properly, and all of...
Was there ever any advancement in automatic restoration from Snapshot based on or schedule or CRON?
Helpful for demo websites and such, but may be more helpful for Public Lab VDI computers too. Allows you to take a library install of 12 -VDI and keep them fresh through constant daily or weekly...
Is the forum boards broken/malfunctioning?
Different parts of the forum are not working...
Replying to post does not sometimes work.
Uploading an attachment button is not functioning.
WYSIWYG editor is not parsing line breaks. Must place in < br > commands manually.
I am trying to get network traffic and DiskIO from SNMP.
When I do:
snmpwalk -v1 -cpublic localhost
SNMPv2-MIB::sysDescr.0 = STRING: Linux zwtprox2 2.6.32-26-pve #1 SMP Mon Oct 14 08:22:20 CEST 2013 x86_64SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10...
This is not a question for Proxmox, but I trust the Proxmox forums (moderators can delete if need be).
I read a lot of the benefits of CEPH, and how you can expand and manage it easily, but what exactly is it. I went with ZFS network attached storage because I could understand it. It's software...
Is there a way to schedule snapshot jobs? I don't want full backups, but the smaller easier to manage snapshots?
I have a website that receive constant updates in which I need to snapshot the website every hour while retaining 48 or so snapshots
Is there any way that I can pass through a parallel port that doesn't exist? My host server does not have any parallel ports, but I need to use a parallel port and spool to my network printer in order to print from a very intricate and important DOS program.
I tried
qm set 123 -parallel...
I just imaged 30+ Computers using Proxmox 3.1 with OmniOS, (FOG and pfSense) KVM.
The images took about 9 minutes for 60GB. All the images were done at the same time. I don't think you can say Proxmox is not production ready.
May not be a big deal, but for 6 - 3tb Hitachi Drives, working in such...
I have a repeated issue with a Zoneminder container.
This can be easily repeated with any CentOS 6 x64, with Zoneminder 1.26 and above.
Clean installation of a standard VZ always presents the following errors in the CT and Proxmox Host.
kernel: VZ QUOTA: file softlimit exceeded for id=116
My...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.