Hi!
After successfully adding a proxmox5 Node to my cluster, i adapted the udev rules (/etc/udev/rules.d) to what the old server with PROXMOX 4 was configured.
I have 3 USB HDD's used for copying Backups to a second location. My udev rule is this one...
Hi!
We are using a 5 node proxmox 4.2 cluster with several VM's.
Now i want to upgrade to proxmox 5 and read in the wiki that it should be possible to ADD a Proxmox 5 node to the existing Proxmox 4.2 cluster.
I just want to make sure i am right with my view of the procedure.
Plan is as...
hi!
I have a server with usb3.0 and a toshiba external USB3.0 harddisk.
Tried to edit config of vm with values:
usb0: hostusb=0480:a006
But then the vm (windows7) says "unknown device" and i can nit use the disk
I read in the wiki about passing USB3.0 devices to vm and tried the line
(from...
Hi
i have a proxmox cluster 3.4 with 3 nodes.
2 of them have glusterfs-server installed and share a 16TB volume.
Each server is connected to a 10Gb switch with a single 10Gb nic
Local writes to the mounted raid 5 partiotion can be done with about 450 MB/sec
I configured glusterfs as storage...
Hi
As my tests went on and i visited the Cebit yesterday, i think my actual setup is the best i can get with the hardware i have.
Dear Proxmox team, please answer the questions below:
1) I have a proxmox cluster with 3 nodes, 2 of them are really big (2 XeonV3 12 core, 256GB RAM, 1 Raid 1 for...
Hi!
I have a windows 2008 R2 Server (64 bit) in a kvm vm.
I tested harddisk with hd-tune and got about 150 MB/s. This harddisk is an IDE one.
Now i added a second harddsik, SATA and tested this disk also with hd-tune. Here i got 250 MB/s which is really good.
I powered off the vm and removed...
Hi!
Just built a new cluster with 3 nodes (proxmox 3.4)
i built a glusterfs on 2 of the nodes and configured a replica 2 gluster.
So far so well.
I added the glusterfs in webUI and connected another NFS Share from a NAS.
Now i wanted to restore a backup (from NAS) to the glusterfs storage.
I...
Hi!
I am running a proxmox cluster with 4 nodes. on one node i am running an openvz ubuntu 8.04 (from proxmox-template) on the nodes LOCAL storage which runs since months very fine.
All graphs are displayed (CPU, Memory, Network, DIsk I/O)
Now i installed a new openvz to get an actual os...
Hi i have a question regarding the clusterconfiguration. Actual i am running a cluster proxmox 2.3 with one NFS Share on which all vm images reside. Now i want to build a new cluster with proxmox 3. The goal is to migrate the old one to the 3.x cluster Is it possible to install a new server...
Hi
After i upgraded my proxmox 2.3 cluster to 3.1, i was not able to mount an USB 3.0 harddisk anymore.
So i googled around and found that someone could solve the issue with a complete new installation.
So i downlaoded Proxmox VE 3.1 ISO.
My Servers (4) all have a 3ware raidcontroller (sata)...
Dear Members,
I updated to the latest Proxmox 3.1 Version and i am in the need to connect external USB 3.0 Harddisks for restoring a cluster.
But since the update the Harddsik is not mounted anymore.
there are several errors under dmesg:
usb 2-1: new high speed USB device number 2 using...
Hi
I have a LAN with a proxmox 2 cluster.
i am connected via openvpn Rw to the firewall of that lan. I am able to reach every host and "normal" Webservers in the lan.
But when i try to access the proxmox webinterface, nothing happens. it seems as the proxmox sends the ssl certificate but then...
Hi
i have a usb hdd which is shown as
lsusb
Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements]
so i edited the vmid.conf file and set
usb0: host=1058:1001
After shutting down vm and restarting, the device is not visible in a windows 7 ultimate...
Hi!
I have a little prob since 4 days. When backing up a virtual machine (kvm) i get errors that the file volume 'NFS1:116/vm-116-disk-1.raw' does not exist.
I checked filesystem and the image exists. But when i do a
ls -lah in that directory i get:
ls: cannot access...
Hi
I installed a cluster with proxmox 2.2. i have 4 nics in the server and was able to create a bond0 (eth0 eth1) without entering ip-address.
then i created bond1 (eth2 eth3) with ip address. at last i created a vmbr0 with bond0 and assigned an ip address to the bridge.
Now i just installed a...
Hi
I have a win 7 kvm machine on a proxmox 1.9 cluster. The machine is working well. i made a backup and restored it on a proxmox 2.3 cluster.
The machine starts, but is only showing "WIndows starting..." and that hangs forever.
Does anybody know hoew i can get the machine working?
I tried...
Hi
I have a question regarding openvpn tunnels.
I use a firewall and from home i am able to connect via OpenVPN to my company. All connections are working fine, except the new proxmox 2.2.
When i try to access the webinterface (i put internal ip into addressbar), the site tells me that this is...
Hi!
I need to build a new cluster with proxmox 2. My old one is 1.9 and i use iscsi with lvm.
The new one should use NFS instead beacause its easier to handle. I read about new backup features in proxmox 2.3 and actually i installed the packes from pvetest.
Now i am able to backup in...
Hi
i am just installing a new cluster proxmox 2.2 to migrate my old 1.9.
I installed a first server, configured 2 NICs as a biond0 and configured it as vmbr0. All well so far.
Then i installed a second server with same procedure, all well
After that i created a cluster and added the second...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.