Search results

  1. M

    [SOLVED] Installation on RAIDZ-1 fails

    Thanks, that was the solution. It's clear of course, that Proxmox was not intended to run in a virtual host. But on the other hand, it runs well with the virtio net driver. :cool:
  2. M

    [SOLVED] Installation on RAIDZ-1 fails

    After a long time I want to test Proxmox again, but a fresh test-installation in a KVM-machine, 4 drives (every 40 GB) and choosing RAIDZ-1 fails:
  3. M

    Migration from kvm-image to Proxmox

    Thank you very much, Marco, runs well!
  4. M

    Migration from kvm-image to Proxmox

    I have a kvm-image creating with dd like *.img How can I use this in Proxmox? In your "Migration of servers to Proxmox VE"-wiki, you wrote: But I don't see a way to add an exitig image, when I create a new VM.
  5. M

    Command Line for virt-viewer

    Thank you very much, Tom. It runs well!
  6. M

    Command Line for virt-viewer

    Hello, to start a spice session from the web interface by clicking the "SPICE"-Buttom on the right upper corner runs well. Great work! But what's the command line, if I want to start a spice connection from a desktop linux machine to a VM in my Proxmox-node by virt-viewer?
  7. M

    Proxmox 2.3 don't run after Upgrade

    The problem ist solved. It concerns not the update to 2.3! After a long time, I decided to watch the start of the server personally on its own display. But there are 3 unfortunately events at the same time: 1.) Any kernel in the past changes the frambuffer. -> no display (I always connected...
  8. M

    Proxmox 2.3 don't run after Upgrade

    No, that's a misunderstanding from me. I mean, that the Display is black and don't work.
  9. M

    Proxmox 2.3 don't run after Upgrade

    2.6.32-17 was removed by the update. I don't know, what's happens, but i find out, that the X-Server don't work properly after the update, so that this causes a black screen.
  10. M

    Proxmox 2.3 don't run after Upgrade

    I've a running HPHP DL385G5 server with an up to date Proxmox 2.2. After updating to 2.3 with apt-get update && apt-get dist-upgrade the server boot, load the ram-disk, I can see the well known messege of Firmware-Bug and other normal messeges for half a second and then it stopps with black...
  11. M

    How to clone a KVM (Windows) Virtual Machine?

    Because real admins are working on the console. :D
  12. M

    VE 2.0 RC1 - backup seriously flawed!

    As I understand, the old backup is not deleted after a successfull new backup, but before or after a failed backup. This behavior is wrong.
  13. M

    Proxmox VE on a SSD

    I've not initialise the whole RAID5 volume, only 70%. How I see now, the server with the ssd's was set up in march 2010, it runs without problems for about 1 1/2 years. You're right, the FastPath software optimized the communication between the SAS-Controller and the Sandforce chip on the disk...
  14. M

    Proxmox VE on a SSD

    Five 128 GB Kingston.
  15. M

    Proxmox VE on a SSD

    For example: After the login on my windows xp vm, a fresh started program is frozen for about 10 to 15 sec.. After this, all runs well. Same in some Linux vm's. The server is not rumnnig the whole day, from 20:00 to 6:00 he is down and reboot at 6:00. Since 2 weeks i've transfer the vm's to an...
  16. M

    Proxmox VE on a SSD

    If it's only a test system, you don't need trim, because it's for only a short time. If you want to use SSD's in a production system, you have to use a RAID Controller, and there is no chance to transfer the trim command through the controller. I've run a server with Proxmox 1.9 on a raid 5 of...
  17. M

    kvm -vga options

    Yes, the spice stuff (qxl is the graphic card for this). Really great, but not in proxmox, because it's currently not supported. :( Documentation: http://spice-space.org/
  18. M

    Very poor network performance on vmbr

    I don't know, what you do and what you mean. The vmbr0 is your physical interface, it has the same mac address as your eth0. Your network interface seems to be an old 100 Mbit/s one. 1gbit/s cards has appr. 60-70 MB/s throughput (depending from the server). May be the network chip on the...
  19. M

    What stripe size for RAID10 with 4 SAS2 HDD

    Andre has a very unusual little disk space (HD SIZE: 49.22 GB) devided to two disks. I think, that in this case the performance of the disks ia very poor. I use SAS 1 HD's with maximal 3 Gbit/s on the interface. The normal seek time is about 5 ms, the reads are over 100 MB/s per disk...
  20. M

    Bug in keyboard layout?

    There stands "Default", but you're right, I've switched it to german and it runs well.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!