Search results

  1. PCI passtrough not working, at all.

    You should try to enable MSI in your windows guest. Check other post in the forum about this
  2. GPU passthrough: still problems

    Take care, in your lspci for your GPU I can see Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ That could lead to a code 43. check in other posts how to enable MSI in windows guest VM
  3. The martians keep on comming

    you can try to sniff network traffic using tcpdump but if there is lot of network load it will be hard to find the relevant packets
  4. Intel NUC iGPU passthrough: working in Linux guest but not in Windows 10 guest

    I don't run Linux VM with GPU passthru, only win10 I don't have my config here but I followed the guide just used this to add GPU to the VM : args: -device vfio-pci,host=00:02.0,addr=0x18,x-vga=on,x-igd-opregion=on
  5. GPU passthrough: still problems

    Hello, Your GPU has loaded radeon driver so I think you cannot bind vfio on it. in the guide, have you followed this section ? echo "options vfio-pci ids=10de:1381,10de:0fbc" > /etc/modprobe.d/vfio.conf and blacklisted radeon driver ? echo "blacklist radeon" >> /etc/modprobe.d/blacklist.conf...
  6. Intel NUC iGPU passthrough: working in Linux guest but not in Windows 10 guest

    Hello, I don't see Error 43 anymore since last update (5.4.44-2-pve), but still some random crash (soft lockup). Not sure it's related to GPU passthrough. Have you tried booting your VM with nomodeset and/or i915.modeset=0 grub option ?
  7. e1000 driver hang

    Hello, same issue here on NUC8I7BEH. I tried the workaroud and it's not working even with the full offload disabled : ethtool -K eno1 gso off gro off tso off tx off rx off rxvlan off txvlan off sg off I don't have intensive network use but when I spawn a win 10 VM (with GPU throughput) the...
  8. Intel NUC iGPU passthrough: working in Linux guest but not in Windows 10 guest

    Hi Flatline, I've got a NUB8I7BEH and manage to have it working… Until Proxmox 6.2. I'm still looking for a stable solution. You should not use : hostpci0: 00:02,pcie=1,rombar=0,x-vga=1 But instead : args: -device vfio-pci,host=00:02.0,addr=0x18,x-vga=on,x-igd-opregion=on Anyway, this...


The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!