Separate names with a comma.
I do have an old 4.4 2-nodes cluster, with shared storage. I'd like to upgrade it (better late than never).
Is it possible for me to...
Solved the problem with the following step on each node::
killall corosync -9
umount /etc/pve -l
service pve-cluster stop
... wait a bit,...
it didnt unfortunately solve any problem to restart it (on each of the nodes)
Journal does not show anything relevant
I am having an issue within a 3 nodes cluster:
After a disk failure, I have re installed one of the nodes (using the same...
Just adding each PVE server's IP address on /etc/hosts on both nodes was enough to solve the problem.
Unsure that it is the best solution, though ?
I have the same problem, and tried the steps above.
root@vdg-pve01-par6:~# qm migrate 104 vdg-pve02-par6 --online...
update: it started to work some time after. Maybe some cache expiration somewhere ?
My ping started to work at seq=5322. Quite a long cache......
Oh just a small precision on it: I noticed that OSPFv3 Hello packets coming from outside are received by the VMs. But not the standard IPv6 unicast.
I just had a fresh install of Proxmox VE 5.1 (see pveversion -v below) on a couple of R610 with PCI Intel NICs (one ixgbe and one...
Seems that I misconfigured the LVM, and forgot to tick "shared"... sorry for the noise :-)
I have a cluster of two proxmox ve servers, on which I have a LVM over iSCSI shared storage for my VMs.
I recently changed the fileserver,...
Yep, that was the issue :-)
Thanks for the tip !
Thanks for your replies, mir, and thanks for your help, Dietmar !
Well... for a VM I was not able to migrate online, I had to shutdown/start it again, and after that, migration went fine...
Not very happy about...
OK, that was it. Sorry for that :-)
- Offline migration works, and I can start the VM on the second node.
- Online migration still fails:...
Well well well, seems that I have to check again my BIOS. I suspect some wrong parameters on the second node regarding virtualisation...
It's DL360 G5 servers with a couple of Xeon E5440, on both nodes.
I have found this (sorry, french): http://forums.fedora-fr.org/viewtopic.php?id=56347
It suggests that I should need "kvm-intel" module, and it...
Yes, it works. I shutdown'ed a VM, and migrated it successfully:
Nov 02 17:48:25 starting migration of VM 118 to node 'pve02-ivr'...