Search results

Is there any progress on this? @mrkoopie You could configure the type by editing your VM configuration file as listed here: https://pve.proxmox.com/wiki/Manual:_qm.conf.

Yeah, I've learned something new today ;) Thank you very much again at this point, @Stoiko Ivanov, you helped me a lot!

Good morning, I installed ethtool and run it on both interfaces. The results are as follows: @Stoiko Ivanov can you see something noteworthy here? There is one thing I'll test asap: the interfaces only support 1/10 GE (I always thought, the downward compatibility is until the bottom of 10...

I got you wrong. I did not try a cross-over connection between my laptop and the server. I do not own such a cable... Thank you for the advice. I thought this would be more complicated (in the meantime I played around with apt-offline). I'll try this tomorrow.

I already connected the port to a laptop and it works as it should. As I mentioned, ethtool is not installed and I can not catch this up via apt. Do you know another way doing so, like downloading the sources/pre-compiled binaries from another pc and then copying them onto the PVE-Server?

Hey, thanks again for your reply. Of course, I already checked the cable (plugging it in another machine results in a proper network functionality). After removing and adding the kernel module i40e, dmesg shows the following regarding this module: Thanks again for your willingness to help me...

Hi Stoiko, I set enp96s0f0 manually up and checked ip link afterwards, which resulted in the following: When I did the same for enp96s0f1 it also got the NO-CARRIER flag. I also opened another shell and run ip monitor which gave me these messages (a new one appears about every 2 secs): The...

Thank you for your response. I get what you mean with the wrong interface -> only enp96s0f0 is a bridge_port for vmbr0. And if I plug it in enp96s0f1 it will therefore not work. => I'll check this one tomorrow (although I thought I've checked the other interface as well...) Do you know what to...

ip addr ip link ip route I could not see any valuable information provided by dmesg except:

I only have two options (enp96s0f0 or enp96s0f1). Both result in the same. I am currently talking to Thomas-Krenn because this might be a simple and unlucky case of delivered broken hardware. Do you have any other tip how I could test the functionality? Sincerely, dmox

Hi dcsapak, thank you for your response. The desired output is as follows. cat /etc/network/interfaces systemctl status pveproxy.service UPDATE I did some further testing to shed some light on this issue: I eliminated the network side, so if I plug in the network cable in another machine...

Hi there, I installed my new hardware from Thomas-Krenn with PVE (v.5.2.1). Now after the installation has finished everything seems fine and the message to open the webinterface in the browser appears with the set up IP address. I am in the same network as the PVE-Server, but unfortunately I am...

@tom vielen Dank für diesen einfachen und zugleich hilfreichen Tip. Ich habe total vergessen, an die Client-Seite zu denken und das zu testen. Problem gelöst.

Hi Proxmox Forum, meine noVNC console zeigt mir folgenden Fehler an, seit dem Update auf die jüngste Version (ich hätte ein Bild eingefügt, aber darf keine externen Links angeben): noVNC encountered an error: TypeError: ctrl is null https://192.168.2.229:8006/novnc/app.js:11303:17...