Search results

  1. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    Thanks All! Just to Summarise this Thread: If you have an issue with the latest Kernel "5.13.19-2-pve" and it won't boot properly with such Kernel (AMD Systems seem affected) use the following steps: apt install pve-kernel-5.13=7.1-4 then remove the old kernel with the following dpkg -P...
  2. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    Hi @Kephin , Thanks for elaborating this, and my server is headless as well. Hence if I do move the system it's a pain in the backside, but its setup to a monitor until I fix this issue. I've uninstalled all Kernels but the "5.13.19-1" - so I guess in Grub I should configure this to "1>0"...
  3. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    Hi All, So the provided fix by @tauceti & @nicedev work so thanks a bunch for that. On the other end I still believe that there is an issue in the 5.13 Kernel - the reboot sequence doesn't physically shut down the device before booting it back up. When you send the Reboot/Shut Down command...
  4. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    @moose: I have the same on the Proliant with the exact same specs. An Intel server isn't affected. @tauceti: I'll try the fix later -and then revert. Thanks in advance!
  5. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    Hi Steffen, Thanks for the support. When I check with efibootmgr -v this is the Proxmox output: Boot0001* proxmox HD(2,GPT,ca72790a-27b1-4118-80a5-c46fd6868c6c,0x800,0x100000)/File(\EFI\PROXMOX\GRUBX64.EFI) From my interpretation its GRUB being used. Furthermore when I check the...
  6. D

    [SOLVED] Proxmox Won't Boot with Latest Kernel 5.13.19-2-pve

    Hi All, I hope this reaches you all well. I just ran updates on my Server, one of which was the the latest 5.13.19-2-pve Kernel. Following a reboot the system wouldn't boot into the Proxmox PVE. Only once selecting the old Kernel in the GRUB Screen 5.13.19-1-pve would the system actual run and...
  7. D

    [SOLVED] Unable to Activate IOMMU - despite active VT-X

    I just rechecked and seems youre right - I was looking at the VT-x option on the page. Hmm looks like it'll need an upgrade. Thanks for your support - much appreciated. BR D
  8. D

    [SOLVED] Unable to Activate IOMMU - despite active VT-X

    So the following was yielded by: for d in /sys/kernel/iommu_groups/*/devices/*; do n=${d#*/iommu_groups/*}; n=${n%%/*}; printf 'IOMMU group %s ' "$n"; lspci -nnks "${d##*/}"; done IOMMU group * 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller...
  9. D

    [SOLVED] Unable to Activate IOMMU - despite active VT-X

    So I had a chance to work on the device today and VT-x/Vt-d is the same Setting in the BIOS. After turning it to disabled and back to enabled the server gave me the following output on: dmesg | grep -e DMAR -e IOMMU [ 0.000000] DMAR: IOMMU enabled [ 0.000000] DMAR: IOMMU enabled...
  10. D

    [SOLVED] Unable to Activate IOMMU - despite active VT-X

    Its an HP Motherboard - but i'll check the BIOS Setting there and revert. But thats a great hint. Thanks.
  11. D

    [SOLVED] Unable to Activate IOMMU - despite active VT-X

    Hi All, over the last few days i've been trying to activate PCI Passthrough using this the provided guide in the Proxmox Knowledge base. My system is on Proxmox 7.0-11 My CPU supports VT-x and its been activated in the BIOS however whaterver i try i'm unable to activate IOMMU for my INTEL CPU...
  12. D

    [SOLVED] Unable to Wipe Disk - "Status Resource Busy"

    Solved: turned out disk was faulty and needed replacement
  13. D

    [SOLVED] Unable to Wipe Disk - "Status Resource Busy"

    Hi Everyone, I hope you're all well. I've been struggling to wipe a Disk located a /dev/sda. This happens whether im using FSDISK -G -W or via the GUI in 7.0-11. The message that both give is that the "Status Resource Busy". Does anyone have a recommendation on how to basically deactive the...
  14. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    HI Moayad, Worked a Charm - thank you! Best David
  15. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    Using Chrome:WIN10 and Safari MacOS 11. The elemnets dont load - when refreshed I saw that it noted "Failed to Load resources, the server responded with status 501(no such file "/Proxmox/panel/StatusView.js").
  16. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    Is there any way to reinstall the entire UI and its elements?
  17. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    Unfortunately it had no effect. After the Login screen blank - regardless of private or not and with and without emptied cache.
  18. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    Hi Moayad, I was updating from PVE 7.0-9 to -11, and everthing had worked previously. The Browser Cache didnt have any effect on the issue. When i enter the login details im now confronted with an empty blank screen, a refresh will load the PVE Manager but the above mentioned issue remain...
  19. D

    [SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

    Hi Community, Hope all of you are well and healthy. I've been struggling the last few days with what seems to be a bug or issue in the Web UI. The UI itself loads and the PVE-Manager is running, however when I navigate between containers or VM the screen is grey and I'm unable to see any of...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!