Search results

try to lauch a sensors-detect an add the modules ; then all the info ar available. root@Water:~# sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +15.2°C (high = +70.0°C) (crit = +80.0°C, hyst = +77.0°C) it8728-isa-0228 Adapter: ISA adapter in0...

So far so good. Run fine on my 3 servers celeron N3450 on cluster with ceph Run fine on my 2 workstation; AMD FX6300, and xeon E1246 v3 :cool: Juste install on my 2 HP N54L, use for storage only, we will see if they boot the next time; but i sure they will . Yes, proxmox everywhere.:p

Can you select local-lvm in the left and see what's on it ?

try tu launch in consoel a watch sensors to see your temp watch sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +19.4°C (high = +70.0°C) (crit = +80.0°C, hyst = +77.0°C) it8728-isa-0228 Adapter: ISA adapter in0: +1.27 V (min = +0.00 V, max =...

i have the same problem with the supend to ram. Il you find something.

try to disable c6 state in the bios

https://forum.proxmox.com/threads/cpu-limitation-help-needed.36866/ try to put cpu limit 0,5 for half th power

Well after some digging. i change the primary card in the bios, in order to boot the nvidia card. --> Same problem. I try to put the AMD card instead the nividia in the debian vm conf, to see if it's an os problem, but still the problem with the amd card in the debian Vm. An the every body...

Bonjour, I have 3 host with proxmox in cluster, runnig fine. I love proxmox and i decide to have it for my workstation too. My workstation hardware : AMD Fx6300 Gibabyte ga-990xa-ud3 v3.0 Graphic card in slot pci one primary card : ATI RADEON 7870 Graphic card in slot pci two : Nvidia...

Check also your CPU. SOme ar not compatible ( pentium g3258 for example :( )

see in the option tab of the vm to activate nfs support.

https://www.turnkeylinux.org/forum/support/tue-20171003-1200/how-update-nextcloud-lastest-version

Try disable c6 states in the bios https://forum.proxmox.com/threads/proxmox-ve-5-0-ryzen-7-1700x-crashes-daily.36123/page-3

This is for the Poxmox mail gateway ( 2 Go ) top - 21:31:06 up 3 days, 17:19, 1 user, load average: 3.74, 3.80, 3.87 Tasks: 48 total, 1 running, 47 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 2048.0 total...

Bonjour, This is the message i have on 2 node, running repectively iredmail and proxmox mail gateway : [2064598.795126]...

I don't know if it's the right or the better way, but it 's work in my case For the bond, it's not necessayy if you have only one network card to share on the proxmox host. On the interface i want to share, i create 4 vlan , and then , i create 4 bridge , on for each vlan (vmbr1 , vmbr2 ...

proxmox config source /etc/network/interfaces.d/* auto lo iface lo inet loopback iface enp1s0 inet manual iface enx000ec6de4a02 inet manual auto bond0 iface bond0 inet manual slaves enp1s0 enx000ec6de4a02 bond_miimon 100 bond_mode 802.3ad...

root@p1:~# vi /etc/network/interfaces source /etc/network/interfaces.d/* auto lo iface lo inet loopback iface enp1s0 inet manual iface enx000ec6de4a02 inet manual auto bond0 iface bond0 inet manual slaves enp1s0 enx000ec6de4a02 bond_miimon 100 bond_mode...

I use option 2 and its's working. ( with 4 interfaces, 2 wan, 1 lan, 1 dmz).

try with sec=ntlm in the option