Search results

  1. J

    Updates - Upgrade -> unstable packets ¿?

    I just had this ! Have a node with a subscription, but two others with non, and the packages were all marked as unstable. Many thanks for this info.
  2. J

    Best setup for use case

    This will be the death of you. I for a very short time hosted backups for my mum, from her laptop, but quickly found another solution as i was beng hammered for support.
  3. J

    New option to Hibernate, option to use rather than shutdown ?

    So with the new option to Hibernate from the shutdown options with virtauls, i can't see any option to use it rather than a full shutdown when the proxmox node is rebooted/shutdown. Is this a planned feature that will be added from the Options/Start/Shutdown order menu ?
  4. J

    GPU passthrough problems

    U need to make sure the drivers for it are installed on the guest. Before you switch over to a spice display. I think once U've installed the OS, u change to the spice display boot into safe mode and install the driver. There should be a guide on the wiki
  5. J

    GPU passthrough problems

    I would try using spice, which even has usbpass though for a few device (I'm pretty sure)
  6. J

    GPU passthrough problems

    What are you using for controlling the console ? I've found spice was very quick, which is one of the options in proxmox
  7. J

    GPU passthrough problems

    A) what did you change, so others can get help from your issue. B) the console as in through proxmox ? That's expected as the video card is the primary video output, u have to either plug a monitor into he card, or RDP to it. I used to also pass thought a normal video feed and set it all up...
  8. J

    GPU passthrough problems

    You need to pass through everything on the GPU, i.e. the audio part as well. so f1:00.0 and f1:00.1 as they are on the same pci group. Make sure u've read a few guides on how to do it under normal linux (Ubuntu or Debian) and make sure they are from this side of 2018/19 as some of the guides...
  9. J

    Help with setting up a good backup strategy on single server.

    Sorry one last question, could i not mount the read only snapshot created by zfs snapshot and either point borg at that or pipe it in to borg ?
  10. J

    Help with setting up a good backup strategy on single server.

    Sorry misunderstood. Hmmmm Going to have to think of another plan for fat virtuals then....
  11. J

    Help with setting up a good backup strategy on single server.

    Already trying that.... zfs send $zfsvmdisk@borg | borg create -v --stats \ $borg_repository::$vm-'{now:%d-%m-%Y-%H:%M}' \ -
  12. J

    Help with setting up a good backup strategy on single server.

    Any pointers on how to do this with Virtual Machines ? Every time i do a backup from a ZFS snapshot (i just called) of the machines the repository grows by the size of disk. i.e. 20 GB drive, first backup takes 20GB, then the second backup (called minutes after the first one completes) takes...
  13. J

    Command to get qemu attached disks

    So i'm using Borg to create a backup, but i might be going about it the wrong way by calling zfs snapshot in my script, and then using that to create the Borg backup. I've just noticed that call virtual machine hard drives start with VM-, so i'll filter out the drives like that i think, as for...
  14. J

    Command to get qemu attached disks

    Yea, so that's what I'm doing, but wasn't sure if there a filter/option to only show disks, as I have to know how the disk is attached, i.e. SCSI sata (tho I'm sure I could change what my grep filter is.... Hmmmm) With regards to the inbuilt backup, it does fulls each time and has no...
  15. J

    Command to get qemu attached disks

    So just trying to get a list of attached disks on a virtual machine. So for containers i used a basic grep the container for the item "rootfs:" then used that with pvesm path (now thinking about it containers can have more than one attached storage) But for qemu virtuals, they could have IDE...
  16. J

    Possible to change the commands used for a backup?

    That's what I thought, If you get a chance can you let me know the file that I would need to change/patch.
  17. J

    Possible to change the commands used for a backup?

    I'm having disk issues where the backup hangs due to other issues, that are in the a queue my end to be solved. Is it possible to add 'timeout 240' to the backup commnd, so that no backup takes longer than 240 minutes, and if it does kill it (sig term seems to get the next one to run) but I...
  18. J

    CEPH bad checksum

    B>I>N>G>O Seems I was missing /etc/apt/sources.list.d/ceph.list so I've created that with the above info. Will do a backup of the host and containers before I upgrade, and will report back.
  19. J

    CEPH bad checksum

    Seems 12.2.4 is the latest, gonna see if I can upgrade as I found a slightly confusing wiki about upstream ceph and proxmox ceph...
  20. J

    CEPH bad checksum

    Think I might have found my own answer if no one else comes back to me. https://ceph-users.ceph.narkive.com/t0epfP0o/no-fix-for-0x6706be76-crcs https://tracker.ceph.com/issues/22464

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!