Search results

Brilliant !! That solved the problem, edited the vm.conf from another node and now the offending node is able to boot and join the cluster. I was not aware that the cluster vm.conf was stored in that location - so I've definitely learned something new here. Thank you so much mvs, you've saved...

HI all, I have a node which is a member of a cluster, where I've done the stupidest thing and now the nodes is unable to boot. I passthrough the full onboard SATA interface, the one where my pve boot drive is plugged into, now the node fails to boot, even with the Proxmox installation media...

This advise is great, but for a novice like me who does most from the web interface, difficult to follow.

Hi Sterzy, Thanks for the prompt advise. Does that mean i should remove the node pve-2 again, remove the old pve-2 key and then re-add pve-2? DerekG

Hoping someone can advise here. I have a 4 node cluster in my homelab setup - all tiny PC's. I faced issues with pve-2, which happens to be cluster ID:1. So I removed from the cluster, deleted the cluster with run: pvecm delnode pve-2. Rebuilt the node with a fresh Proxmox install and added...

6 month update, just in case anyone is interested. I'm unsure if a change in Proxmox 7.0 has helped or if I've just gained more experience, but I am now able to passthrough the Intel iGPU with display output on the DisplayPort using GVT-d to a macOS VM. I have the physical display out and...

Hi Benjam, I have a similar setup/issue with my Fibre connection, this might help to point you in the right direction. I have a 1GB Fibre connection from a UK community provider. My firewall is a pfsense VM running on Proxmox 7.0 In my case, I experience 2 issues. 1) My ISP has a 'sticky'...

HI generalproxuser, Disclaimer, I'm fairly new to Proxmox and only trying to help where I can. I wouldn't follow the 2nd container guide, although most commands are the same as Ubuntu, certain items (especially around networking). Ubuntu default bridge name is br(-lan) while Proxmox is vmbr0...

Hi khampol, I have the same setup, a pfSense VM as my primary homelab router (well all home router really). If you have the Windows VM installed then Proxmox will have created the default linux Bridge vmbr0, that forms the LAN network/subnet. The bridge vmbr0 should already have the...

I've not tried the Homelabs OS, But as a newb myself, about 6 months in, I can advise that most of those app can easily be installed on a Ubuntu VM with SNAP, Docker and Portainer installed. There is a 1-click self hosted registry for Portainer which will get you going, with the added advantage...

HI Dominik, You're a life saver!! After removing those instances, I was able to see available vGPU's in Proxmox web interface. However, after reboot, the old instances returned and I realised that I'd made them persistent during my 1st attempt about 4 months ago. I did not realise that...

Sorry if I'm butting in, but if you're new to Docker, I would install the Portainer Docker web interface. Derek DerekG

HI all, I've been running my homelab on 2 Proxmox nodes for about 6 months now, I consider Proxmox the best thing since sliced bread, but I have an issue with GVT-g which I can't overcome despite 2 solid days of internet research. The node is an Intel i7-8750 mini PC so only iGPU (no slot for...

Hi kcrawford, I can't help, but I hope you can assist me. I'm on my 2nd attempt at getting gvt-g working, so far I've never manage to boot a VM, could you share your config? The guide I was following did say they had abandoned the effort due to instability issues. Thanks Derek

When I was trying the iGPU passthrough I found the newer Intel Windows drivers failed, I can't remember which version, but an older version solved my problem. DerekG

Thanks a bunch for pointing me to that thread, it's the exact issue I'm experiencing, although I haven't had the time to test the solutions yet. All the best Derek Gilzean

Hi all, Just to update this post. I switched to another (USB) NIC last night (after changing cables and switch ports), and have zero dropped connection since the change. So unfortunately it looks like my Intel NIC might be the root cause of my problems. I'll investigate further but all signs...

Hi all, Can anyone advise on this error: I'm running the following version of Proxmox: Kernel Version - Linux 5.4.119-1-pve #1 SMP PVE 5.4.119-1 (Tue, 01 Jun 2021 15:32:00 +0200) PVE Manager Version - pve-manager/6.4-8/185e14db And it seems like since the last update my Intel NIC hangs with...

HI Itay1778, That guide is out of date, now the IGPU info is added to the GRUB line. Also it's different if you are booting zfs, where you have to insert the iommu=on in the /etc/kernel/cmdline Also most of those guides are discussing IGPU passthrough are NOT discussing passthrough WITH video...

Hi avw, I've explored every avenue I could to resolve this issue, I never found a solution other that an alternate graphics display, either with a secondary graphics card, USB-C Alt-Display or software Displaylink adapter. Just for your reference, I have the IGPU passed through to a 2nd...