Search results

Hi, I share to you my commands that I used to upgrade the firmware in my case. The process got me a Success message but the network cards didn't work well at 25Gbps. I've tried to install drivers downloaded by Broadcom site. https://docs.broadcom.com/docs/NXE_Linux_Installer-230.1.116.0 We...

Hi, It seems that the problem with Broadcom chipset has been fixed in the last kernel 6-8.8 No actions required to overcome the problem for our server Supermicro. I'm not sure about Dell but in out case the problem has been fixed Regards

Hello, As the documentation explains, if you activate the feature " Repeat missed", for each task couldn't start, the system will try as soon as possibile. But I want to raccomend to use Remote feauture if you want to have anorher backup level. For example, you can use "local" PBS for frequent...

Can you check if the "Autostart" funcion is checked on the network interface? Please past here this command: ethtool <interface_name> thank you

Hello, before these kind of operations in better to do a backup of /etc/network/interfaces cp /etc/network/interfaces /etc/network/interfaces.old I hope that your server has an server management to simulate CLI :)

Hello, what does "VMs only work when assigned to the network the proxmox host belongs to" mean? No access to internet? No access to physical network? No ping to the gateway? Thanks

Hello, you have to set both SPF and DKIM record in your DNS provider in order to authorise that public IP (from you are sending the test email) to send emails. Google in pretty fussy about it

Hello, can you check if the Autostart for the VM network interface is checked?

In my case, I tried to install PVE8.2 in a new server but the AIOM network card are not recognised by the system. If I try to upgrade the system from PVE8.1 to PVE8.2 the network card doesn't work at 100%: I have to restart the networking service manually. Very tragic situation...

You can also create a VM with pfsense or opnsense. You can configure dhcp for every network or if you prefer a dhcp on a NET and a dhcp relay on the others NET.

Yes sorry is a Ubuntu kernel. If you need to backup all VM I think the best is the PBS solution.

The Proxmox (PVE) is a debian kernel; I do not think that the backup software you have mentioned, can backup all the PVE. But if you want to backup all the VM on the PVE, the right metod could be the PBS; you can also restore sigle file or directories (of the Vm's) fron the PBS backup.

Try to disable the firewall on the VM to make other tests. From your VM you can ping the pve and viceversa?

Hi, Have you checked in the hidden devices on device manager? Remove any other virtio network card reference and try to reinstall again, try to use the last version virtio-win-0.1.240.iso regards,

Hi, You can use BalenaEtcher, it's so easy, regards,

Hello, on what hardware is Proxmox installed? How many network interfaces do you have? EF

May be you already know that: If you plan to use the file system ZFS you have to not use the raid controller. Anyway Proxmox, normaly can detect the HDD on the controller raid, so is a HW/drivers problem. I do not know the Hrdware-raid you are using, is a zerochannel? May be is a compatibility...

with fdisk on sdb1 you have the same result?

Probably the boot partition work, but I think you lose the rest of yor disk. You can try with a live distibution and try to mount the file system on the HDD, but probably I don't know a solution for this. Sorry.

mabe you louse your partitions if you try fdisk /dev/sda then p ?