Search results

LOL was tired x) it's done and it's working fine. Do you have other recomendations about this

Hi everyone. I have the same problem on zfs version zfs-0.8.5-pve1 pveversion pve-manager/6.3-3/eee5f901 (running kernel: 5.4.78-2-pve) cat /etc/modprobe.d/zfs.conf options zfs zfs_arc_max=1737746 Target size (adaptive): 100.0 % 3.3 GiB It is a zfs bug ?

I'm still having troubles with swap.. free -mh total used free shared buff/cache available Mem: 8.0G 714M 6.1G 833M 1.2G 7.3G Swap: 12G 748M 11G 748 Swap usage : PID User...

Hi, I'm using a lot of container with mariadb inside, but mariadb swap a lot even if i'm giving lot of "Pool memory and buffer" i don't understand why still using swap when i have free memory.. my swapiness is to 1 but in process there is not a lot usage of swap... but there is like "ghost"...

Here you have the lxc config : arch: amd64 cores: 4 cpulimit: 4 hostname: XXXXX memory: 8192 nameserver: 10.0.0.60 62.210.16.6 62.210.16.7 net0: name=eth0,bridge=vmbr1,gw=10.0.10.12,hwaddr=9A:6B:30:5D:36:1C,ip=10.0.40.69/16,type=veth ostype: debian rootfs: local:4069/vm-4069-disk-0.raw,size=10G...

Hi i'm in trouble On my LXC containter free, give me free total used free shared buff/cache available Mem: 8388608 219568 7360020 456368 809020 8169040 Swap: 12582912 1271816 11311096 That mean 1.2Go Swap.. But...

Hi oguz. Do you know other tools ? Best regards

Hi, I'm using LXC container on NFS target when i do directly inside Proxmox /mnt/pve/free-storage I got this: fio --name=rand-write --ioengine=libaio --iodepth=32 --rw=randwrite --invalidate=1 --bsrange=4k:4k,4k:4k --size=512m --runtime=60 --time_based --do_verify=1 --direct=1...

Thx for your reply. vzdump is not like veem. Because we need to backup all server. I'll reply here ie veem give us more info about this.

Hi, I'm using Proxmox inside Vmware only with lxc . The goal here is to provide an user friendly interface with containers. When i add my Proxmox 6 ( PVE 5.3.10-1) inside a veem backup job. Proxmox crashed and reboot. Nothing inside syslog, Any idee ? Best regards

Hi yes i think this is it :) Can you explain me what do you mean or what is the command :)

Ok the ipv6 config look like solved.. I have another question what do you think about ifconfig eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 2001:XXXX:XXXX:20c6:ff:ff:ff:22 prefixlen 64 scopeid 0x0<global> inet6 fe80::c4f:eeff:fec1:cc prefixlen 64...

Hi there Thx for reply journalctl -b -- Logs begin at Wed 2019-09-18 00:07:36 CEST, end at Wed 2019-09-18 00:07:42 CEST. -- sept. 18 00:07:36 stun systemd-journald[41]: Journal started sept. 18 00:07:36 stun systemd-journald[41]: Runtime journal...

Hi ifdown eth1 ; ifup eth1 ifdown: interface eth1 not configured RTNETLINK answers: File exists ifup: failed to bring up eth1 There is no syslog output when i do this command Best regards

auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.91 netmask 255.255.0.0 auto eth1 .... iface eth1 inet6 static address 2001:XXX:XXX:20ff:0:0:0:11 netmask 64 gateway 2001:XXX:XXX:20ff:ff:ff:ff:ff ifup eth1 ifup eth1 RTNETLINK answers...

iface eth1 inet6 static address 2001:XXX:XXX:20ff:0:0:0:11 netmask 64 gateway 2001:XXX:XXX:20ff:ff:ff:ff:ff ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00...

@Stoiko Ivanov Thx for you reply. yes of course my provider gave me a bad network I used 2001:4XX:XXXX:20ff: as network and it's work well.. But inside my interfaces config iface eth1 inet6 static address 2001:41XX:XXX:20ff:XXX:XXX:XXX:XXX netmask 64 gateway...

Hi, Proxmox info : Kernel Version Linux 4.15.18-10-pve #1 SMP PVE 4.15.18-32 (Sat, 19 Jan 2019 10:09:37 +0100) PVE Manager Version pve-manager/5.3-9/ba817b29 When i configure On my server i did not have inet6 ip . I have to do manualy On debian 9 ip -6 addr...

Hi I want to use nfs inside lxc and i don't want to use a profile. but apply it to all my lxc as default and i don't know what is the default apparmor use with proxmox. I add this to lxc-default and lxc-default-cgns : mount fstype=nfsd, mount fstype=nfs*, But still not working. when i use...

I have 2 pve-cluster one for old production and one for new. Both have the same cluster name. But not linked. I'm using new host with fresh install of proxmox.