Search results

  1. J

    RGManager won't start

    Thanks to you we were able to solve this issue. I had to add all nodes again (fence_tool join) Now rgmanager is running again. One last question. When 3 nodes are running all with vm's in HA. Does RGManager need to be running on all nodes or only on one node?
  2. J

    RGManager won't start

    Hello Tom, Thank you very much for you reply's. I used the command but same results as my post above when using the other command. root@Proxmox01:~# service cman start Starting cluster: Checking if cluster has been disabled at boot... [ OK ] Checking Network Manager... [ OK ]...
  3. J

    RGManager won't start

    Hello Dietmar, Today we had our first test day with 25 users working on 38 vm's and beyond that we are using old hardware our test passed. 3x HP proliant Proxmox 3.1 1x HP proliant Freenas 2x MSA 60 storages 24x 500gb 7.2k hd configured as raid 5 Now i can focus back on HA because its a...
  4. J

    RGManager won't start

    So nobody has any idea about this RGManager issue?
  5. J

    RGManager won't start

    Thank you for your reply. We found out that the kvm option was not enabled in the bios settings of one of the servers. However we have tested by disconnecting a utp cable from Proxmox02 and it worked, for a while.. After the test we rebooted Proxmox02 and now we are with the same problem...
  6. J

    RGManager won't start

    Thank you very much Dietmar that solved the issue, but.... I'm trying to test the HA by starting 2 VM's (They are managed by HA). But they won't start, after 10 minutes the output is still : Executing HA start for VM 100 Member Proxmox01 trying to enable pvevm:100... Our goal is to get a...
  7. J

    RGManager won't start

    root@Proxmox01:~# dlm_tool dump 1385541785 logging mode 3 syslog f 160 p 6 logfile p 6 /var/log/cluster/dlm_cont rold.log 1385541785 dlm_controld 1364188437 started 1385541785 logging mode 3 syslog f...
  8. J

    RGManager won't start

    Thank you for your reply. but there is no rgmanager.log located in /var/log/ Best Regards, Jimmy
  9. J

    RGManager won't start

    Hi, i'm trying to set up a test cluster with 3 nodes in HA with a fencing device. when i'm trying to active it at the HA tab i'm getting the follow error: When i go to Node > services > start RGManager it says: Starting Cluster Service Manager: [ OK ] TASK OK But the status says ''stopped''...
  10. J

    HA fencing error when trying to activate

    Hi, Still the same problem. Everything is configured properly now. - 3 Proxmox ve 3.1 Nodes - Nodes are in cluster. - Shared storage by NFS Configured as HA ( followed instruction from the Fencing wiki page) http://pve.proxmox.com/wiki/Fencing#Enable_fencing_on_all_nodes Failover...
  11. J

    HA fencing error when trying to activate

    Thank you for your reply. I have forgotten that it needed 3 nodes, I have installed a third node. I'm now started with the configurations. I will update the status when everything is configured. Thanks, Jimmy
  12. J

    HA fencing error when trying to activate

    Seriously, does nobody have any ideas? Even the admins. So i have payed €49,99 for this terrible support forum for really bad support. This is really outrageous.
  13. J

    HA fencing error when trying to activate

    It's fixed it was something in the script. now we have a new problem. When i go to Node > services > start RGManager it says: Starting Cluster Service Manager: [ OK ] TASK OK But the status says ''stopped'' When using /etc/init.d/rgmanager start in CLi it says the same...
  14. J

    Windows 8 change resolutions

    dietmar, tom do you have any idea? we have tried everything.
  15. J

    Windows 8 change resolutions

    I have tried all those options but nothing changes. Maybe you can try to install w8 yourself so you can see the issue.
  16. J

    Windows 8 change resolutions

    Like I mentioned before it only happens with W8, other OS work fine. Thanks for your reply anyway.
  17. J

    Windows 8 change resolutions

    I have already tried that and it didn't matter. How should it normally work, adjust it self or should I be able to change the resolution?
  18. J

    Windows 8 change resolutions

    Hi, I was wondering if it's possbile to change the resolution of a windows 8 vm. Because the resolution is to big for a 15 inch laptop like shown in the attatchment and its not possible to change te resolution in windows 8 as it's greyed out in the options. Thanks, jimmy
  19. J

    HA fencing error when trying to activate

    Hi, after using: /etc/pve# ccs_config_validate -f cluster.conf.new it says; Configuration validates But when I'm trying to activate it at the web interface it stil comes with the next error: config validation failed: config validation failed: /usr/sbin/ccs_config_validate: line 186: 2008...
  20. J

    HA fencing error when trying to activate

    I just did that and it comes back with: root@Proxmox01:/etc/pve# ccs_config_validate -f cluster.conf.new Configuration validates

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!