Search results

Ok Thx for the answer :)

Yes i saw that the last one not have any errors, but if the number of errors not increase the hard drive are good in your opinion, the long test smart is reliable for determine if the drive are good or not? This is a secondary server non the primary is only for emergency if the primary has...

So basically all the 4 drive of the pool have problem? and i need to replace?

Ok but could be this incorrected error are been here before i install proxmox and create the zfs pool? I need to run long smart test on all disk again?

Yes but this test is before the resilvering process, so if the number not increase i think it's of more or less

Here all the drive of zpool01 root@pve02:~# smartctl -a /dev/disk/by-id/scsi-35000c500c21a9903-part1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.16-4-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor...

Here: root@pve02:~# smartctl -a /dev/disk/by-id/scsi-35000c500c21a9a13-part1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.16-4-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE...

ok i need to test it, thx btw

This is the output of: smartctl -a /dev/disk/by-id/scsi-35000c500c21a9a13-part1 Uncorrected errors remain 8, i need to run long test?

Hi all I want to say if it's possibile to replicate local-zfs pool? My setup is 3 server with only 2x1TB ssd each one. So when i install proxmox i have these storage on each one server: local, local-zfs Is possibile to replicate "local-zfs" on other two server?

Hi i don't know how but i poweroff and poweron the server and the resilvering process start automatically once is finished with 0 errors now this is the situation of zfs: So the problem was only logical and not hardware fault of the disk? Thanks

This is the result of the long test:

I launch the test where i see the results? Yes i see there 8 uncorrected read erros, so what i need to do?

@leesteken any update?

This is the output of the smart command you write: https://termbin.com/0jiu

Hi Everyone Zfs send me an email for zfs degraded, but if i go on disk the smart is OK. i need to replace the disk anyway or it's only a software problem on the drive and not hardware? ZFS

Hi This is the output of this command: nvme error-log /dev/nvme0n1 https://termbin.com/7c8r

Hi all I have a server on Hetzner Cloud where i installed proxmox ve in zfs mirror on two nvme disk. Last Friday one of the disk smart failed so i open a ticket with hetzner support and they changed the fault nvme disk with new one and i replace the zfs partition. The day after arrived a new...

I don't use monitoring system like zabbix i have only configure email notifications on proxmox and thats'it. i use uptime kuma for monitoring tcp port include proxmox, but nothing more that that. I've tried zabbix for monitoring but he takes time to setup and configure it.

Ok you have zabbix in cloud or on premises in the same network of pbs? Is difficult to setup and configure zabbix for this purpose?