I've created a new proxmox environment with 4 nmve disk. But in the GUI and on fdisk I see only 3 disks. Syslog shows all 4 disks.
I changed the location of the disk and the setup on the pcie / nvme card and can see all serial numbres depending on the position of the nvme. But the GUI...
Yes that's the way. Thank you.
- create Media Pool
- format Tapes
- Label more than one Tape and assign them to the Media Pool.
- Run Backup Job
2023-01-14T00:41:59+01:00: wrote 199 chunks (835.19 MB at 53.06 MB/s)
2023-01-14T00:42:02+01:00: allocated new writable media 'xyz_2'...
I do have a tape drive, not a changer and yesterday I did a backup which needed multiple tapes to backup too.
After 15.5 hours of backing up chunks I got the error message "TASK ERROR: alloc writable media in pool 'TapeBackup' failed: no usable media found". The media was full ...
Thanks. That helped me one step further. Now 3 monitors are running. 2 managers are configured and running. Not able to start the managers and not able to configure the 3rd manager.
Following Error Message: /var/lib/ceph/mgr/ceph-pve-node3/keyring.tmp.2235958
Now I've two weeks holiday. I...
Did following steps:
pveceph purge | on all nodes
rm -r /var/lib/ceph | on all nodes
reboot of one node
Why does the log file still have entries and it looks like ceph will be started?
2019-09-06 23:24:06.667 7f69a14cc3c0...
I found following log entry after reboot of the node:
2019-09-06 20:55:17.263 7fd6ce7fa3c0 0 set uid:gid to 64045:64045 (ceph:ceph)
2019-09-06 20:55:17.263 7fd6ce7fa3c0 0 ceph version 14.2.2 (a887fe9a5d3d97fe349065d3c1c9dbd7b8870855) nautilus (stable)...
Installed the latest Updates. Same result.
pveceph init --network 10.1.1.0/24 was working But afterwards I get following error:
unable to get monitor info from DNS SRV with service name: ceph-mon
Could not connect to ceph cluster despite configured monitors
After the upgrade to Release 6 I tried instead of upgrading CEPH to reinstall CEPH. I used a page which showed to delete several directories.
( rm -Rf /etc/ceph /etc/pve/ceph.conf /etc/pve/priv/ceph* /var/lib/ceph )
pveceph init --network 10.1.1.0/24 was working But afterwards I get...
Ich bekomme seit ca. 10 Tagen täglich eine Warnmeldung bzgl. Smart Error.
The following warning/error was logged by the smartd daemon:
Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors
WDC WD30EFRX-68N32N0, S/N:WD-WCC7K5NJY8V8, WWN:5-0014ee-26483534b, FW:82.00A82...