Search results

  1. aasami

    [SOLVED] pve7to8 cgroup warning incorrect?

    The same occurs with AlmaLinux 9.2. I have upgraded one of cluster nodes to PVE8 and migrated this LXC to it without any issues. But when I run again pve7to8 on this upgraded node it still reports that: WARN: Found at least one CT (30188) which does not support running in a unified cgroup v2...
  2. aasami

    Failed to activate new LV on vm creation/cloning

    Thank you @monk! Your workaround with dmsetup remove works perfectly. I home Proxmox devs will fix this annoyance one day.
  3. aasami

    Bond setup

    Thank's for the tip. Now I've tried layer3+4 hash policy, but the result is unchanged.
  4. aasami

    Bond setup

    I don't think that it's 50/50 chance to use the same link. When one link is fully saturated, it should use another one. Otherwise it wouldn't have any sense to use bond (802.3ad), when there is no gain in performance.
  5. aasami

    Bond setup

    Using 8 parallel streams gives the same speed unfortunately: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 239 MBytes 2.01 Gbits/sec 0 721 KBytes [ 7] 0.00-1.00 sec 248 MBytes 2.08 Gbits/sec 0 721 KBytes [ 9]...
  6. aasami

    Bond setup

    Hi! I have some troubles setting up bond on BCM57504 via S5224F-ON. Network configuration: auto lo iface lo inet loopback auto enp129s0f0np0 iface enp129s0f0np0 inet manual auto enp129s0f1np1 iface enp129s0f1np1 inet manual auto enp129s0f2np2 iface enp129s0f2np2 inet manual auto...
  7. aasami

    unknow interface type in gui when using vlan and bond with bridge

    It's just a wild guess, but I think the type is determined from the name. I would try to rename vmbr0.5 to vmbr5 in /etc/network/interfaces and reload with ifreload -a
  8. aasami

    [SOLVED] Opinion poll: Adding Ceph cluster to existing PVE cluster

    Hi, I have a 13-node PVE custer connected via FC to storage. I'm going to add another 4 PVE nodes as Ceph cluster storage. I would like to know whether it is better to have separate 4 node Cluster with Ceph connected to the existing cluster as separate storage, or should I add those 4 nodes with...
  9. aasami

    [SOLVED] Delivery to one specific domain fails for an hour or two, then it works again

    You nailed it! This helps a LOT indeed! Thank you Stoiko.You're the man!
  10. aasami

    [SOLVED] Delivery to one specific domain fails for an hour or two, then it works again

    Yes, I checked it from PMG. Here is the output: [pmg ~]# drill mx ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 46346 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; IN MX ;; ANSWER SECTION: 917...
  11. aasami

    [SOLVED] Delivery to one specific domain fails for an hour or two, then it works again

    There is only A record for "" no AAAA record found. This sholudn't be a problem normally. Most domains we communicate with doesn't have AAAA records and delivery works to those.
  12. aasami

    [SOLVED] Delivery to one specific domain fails for an hour or two, then it works again

    Here is error report, when it doesn't work: Nov 4 09:58:08 pmg postfix/smtp[2812391]: B90D347EA8: to=<>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for type=AAAA: Host found but no...
  13. aasami

    WARNING: Wide character in print at /usr/share/perl5/PMG/ line 48.

    Hi I've experienced this issue many times in the past, and it starts to be annoying. It looks like this is still not fixed in current version of PMG. Is this such low priority because nobody cares or the solution is somewhat complex? The bug report hasn't been updated for three years now.
  14. aasami

    [SOLVED] IPVS load ballancer can not establish TCP connection across two cluster nodes

    When noone replied, I have posted a ticket to the customer portal and here is the solution: Enable invalid packets with nf_conntrack_allow_invalid on all cluster nodes in /etc/pve/nodes/$NODE_NAME/host.fw: [OPTIONS] nf_conntrack_allow_invalid: 1 Thank you Proxmox for your superb support!
  15. aasami

    [SOLVED] IPVS load ballancer can not establish TCP connection across two cluster nodes

    Hi, I have an IPVS direct routing Load Ballancer VM (LB) which works only when the target Backend VM (e.g. B1) is on the same cluster node. If LB is on different node than Backend (B1), TCP connection between Client (CL) and Backend (B1) can not be established. CL sends SYN packet to LB and LB...
  16. aasami

    Migration Problem

    I've experienced the same ugly issue today. The "workaround" of using offline migration first and booting on the other node works and VM can be migrated online since then. But it's really sad. It afects all VMs on 1 of my 7 nodes. All nodes are fully upgraded.
  17. aasami

    [SOLVED] How to initizlize remote iSCSI LUN device with multipath?

    I have exported an iSCSI LUN with multipath to a PBS server in the SAN. How should I initialize this remote disk? It doesn't show up in drive list. # lsscsi [1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.5+ /dev/sr0 [2:0:0:0] disk QEMU QEMU HARDDISK 2.5+ /dev/sda [3:0:0:0]...
  18. aasami

    PXVE, Nginx & Websocket proxy

    This doesn't seem to be the case. I've set proxy_pass to single host. The 8006 works okay but SPICE proxy on 3128 doesn not: server { listen <server_IP>:3128; include mime.types; server_name <FQDN>; location / { proxy_pass https://n1:3128; proxy_set_header Host $host...
  19. aasami

    PXVE, Nginx & Websocket proxy

    How about SPICE proxy is it working for you? I have tried to proxy it over nginx but without success: upstream spice {ip_hash; server n1:3128; server n2:3128; server n3:3128; } server { listen <server_IP>:3128; include mime.types; server_name <FQDN>; location / { proxy_pass...


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!