Search results

  1. No Network Adapter in fresh Windows Server after Upgrade to Proxmox 7

    I have the same issue. Windows Server 2019, Windows Server 2022, Windows 10, Windows 11. All no network device. Update: Issue fixed by installing
  2. [SOLVED] No gui after network change

    That fixed it! Thank you very much!
  3. [SOLVED] No gui after network change

    Like this? root@pve:~# cat /etc/hostname pve
  4. [SOLVED] No gui after network change

    runs successfully root@pve:~# ping -c1 $(uname -n) PING pve ( 56(84) bytes of data. 64 bytes from pve ( icmp_seq=1 ttl=64 time=0.054 ms
  5. [SOLVED] No gui after network change

    /etc/hostname localhost pve pve.server /etc/hosts pve # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts
  6. [SOLVED] No gui after network change

    I also found those errors: root@127:~# service pve-cluster status ● pve-cluster.service - The Proxmox VE cluster filesystem Loaded: loaded (/lib/systemd/system/pve-cluster.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2021-02-11 16:08:22 CET; 58min ago...
  7. [SOLVED] No gui after network change

    I connected a screen to the server and it states that the management gui can be found at
  8. [SOLVED] No gui after network change

    I have not configured anything in the firewall here is the output of I have not configured anything in the firewall here is the output of iptables-save root@127:~# iptables-save # Generated by iptables-save v1.8.2 on Thu Feb 11 16:48:44 2021 *raw :PREROUTING ACCEPT [3321:860996] :OUTPUT ACCEPT...
  9. [SOLVED] No gui after network change

    I think I found something.... can you have a look at this? @Stoiko Ivanov root@127:~# netstat -an | grep 8006 tcp 2 0* LISTEN tcp 514 0 CLOSE_WAIT
  10. [SOLVED] No gui after network change

    Hey! Thank you for your tip. I changed it back to /24 rebooted but I still can not access the gui. In an other thread someone mentioned tail -f /var/log/pveproxy/access.log this is my output of that: root@127:~# tail -f /var/log/pveproxy/access.log - root@pam [11/02/2021:14:39:37...
  11. [SOLVED] No gui after network change

    This is the output of my ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host...
  12. [SOLVED] No gui after network change

    this is my /etc/network/interfaces auto lo iface lo inet loopback iface enp4s0 inet manual auto vmbr0 iface vmbr0 inet static address subnetmask gateway bridge-ports enp4s0 bridge-stp off bridge-fd 0...
  13. [SOLVED] No gui after network change

    Hey everyone, I got my new firewall/router today and put my proxmox host into a new subnet. I changed the ip address in Proxmox to from The host is pingable and I can connect to it over ssh, however the Webgui of the server is not available. Can someone help me...


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!