Search results

  1. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Dear bennetgallein, xattr support or lack of it is a clear cause of the symptoms, however, in my case, it's a turnkey container with Nextcloud and enabled full text search with elssticsearch (and readonlyrest). When backup fails, I have to reboot the container and then trigger a file scan and...
  2. proxmox-boot-tool kernel pin ohne Funktion

    So, hab getestet. Ein einfaches proxmox-boot-tool reinit proxmox-boot-tool refresh hat das Problem gelöst! Vielen Dank! ☘️ ‍♂️ \\EDIT: bevor jemand am Männersymbol Anstoß nimmt, auf meinem Android-Handy war es der winkende Typ. Email von Android zu Outlook unter Windows zu Evolution unter Linux...
  3. Frage zu dnodesize=auto für Speicherung von ACLs in xattr im ZFS

    Jetzt kann ich es beantworten. zpool get all | grep dnode ist nicht dasselbe wie zfs get all | grep dnode Wenn man also grub benutzt, darf man das keinesfalls irgendwo auf rpool machen, weil das Flag dann für rpool aktiviert wird und aktiv bleibt, weil ja sehr schnell eine andere Inodengröße...
  4. proxmox-boot-tool kernel pin ohne Funktion

    Hey, vielen Dank, sehr gern, ich habe gerade den anderen Thread gelesen. Ich muss nur heute 20 Stunden arbeiten, dann ins Koma und am Wochenende meine alte Wohnung abwracken. Danach probiere ich es sofort und gebe Rückmeldung. Schlaft schön!
  5. Frage zu dnodesize=auto für Speicherung von ACLs in xattr im ZFS

    Ich habe mal eine Frage und selbst wenn sie dumm ist, kann ich sie mir selbst nicht sicher genug beantworten. ;-) Im Wiki steht, dass man beim ZFS dnodesize=auto nicht auf rpool setzen soll, weil das Probleme beim Booten mit Grub gibt. Meine Frage nun: darf ich dnodesize=auto auf rpool/data...
  6. proxmox-boot-tool kernel pin ohne Funktion

    Andere ESPs gibt es nicht - es könnte aber sein, dass es daran liegt, dass das System seit Version 6.0 läuft und ja irgendwann von Grub zum Proxmox Boot Tool migriert wurde und Reste von Grub eventuell noch da reinspielen, obwohl man die beim Booten nicht sieht. Ich werde nächstes Wochenende mal...
  7. proxmox-boot-tool kernel pin ohne Funktion

    Lieber Fabian, vielen Dank für Deine Antwort und entschuldige bitte die Verzögerung. Hier die Outputs: root@pve1:/boot/efi# bootctl status System: Firmware: UEFI 2.40 (American Megatrends 5.11) Secure Boot: disabled Setup Mode: setup Boot into FW: supported Current Boot Loader...
  8. proxmox-boot-tool kernel pin ohne Funktion

    Vielen Dank für Eure Antworten. @fabian: So dachte ich mir das auch, es war nur ein Versuch. root@pve1:~# proxmox-boot-tool kernel list Manually selected kernels: 5.13.19-6-pve Automatically selected kernels: 5.15.30-2-pve 5.15.35-1-pve Pinned kernel: 5.13.19-6-pve root@pve1:~#...
  9. proxmox-boot-tool kernel pin ohne Funktion

    Liebe Mitstreiter, vielleicht weiß ja jemand etwas Erhellendes. Ich möchte vorerst den Kernel 5.13.19-6 zum Booten verwenden, weil mit den 5.15er Versionen unsere Windows Server 2019 VMs immer abschmieren. Das Problem ist nun, dass proxmox-boot-tool kernel pin 5.13.19-6 ohne Funktion bleibt und...
  10. VM shutdown during backup to QNAP, KVM: entry failed, hardware error 0x80000021

    Me too, same thing. Strange thing is the occurrence of patterns. Backup runs at 00:30 a.m. It usually finishes at 3 a.m. During backup, machine 103 crashes sometimes. By 6 a.m., machine 100 and 103 are always crashed. Sometimes, they crash again at 11 a.m. Machine 102 hardly ever crashes...
  11. Windows Server 2019 VMs die randomly after Upgrading to 7.2

    Post deleted, problem still not solved after some days of non-occurrence, I investigate further. I first thought I had found the solution. ;-)
  12. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    I observed the problem for some time now. It's not the ACLs. Nor do I use them nor does disabling ACL on root fs solve the problem. Still, 3/5 of all backup runs succeed, 2/5 fail. Still no clue. Is this really no common issue? I didn't setup fancy tinker shit, it's all pretty standard. ;-)
  13. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    I pay a Green Manalishi for your 2 Cents. ;-) Thank you, that's great. I'm going to try this out. In the past three day, suspend backup fall back worked on that container. Just like everyone, I like spontanuous errors without logging, but thanks to you, I sleep well now. ;-)
  14. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    So, after a while, it turns out as follows: once or twice a week, the daily backup in question works, the rest of the week, it fails. Logs of rsync don't show errors, I still don't have a clue, I just worked around by setting up a stop mode backup for that specific container. Happy new year to...
  15. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Ok, my fault, I'm fine with suspend mode if it works. I always had containers in directories on a ZFS Storage. Never mind. But backing up container 108 in suspend mode only worked once since upgrading proxmox (when I wrote it above). New normal is that I have to stick to stopp mode for that...
  16. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Very strange: the problem partially disappeared on its own by advanced wizardry and shady magic. Container 108 with that suspend mode failure finally completed suspend mode backup successfully tonight. What still remains is that no other container is able to run backups in snapshot mode (due to...
  17. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    So, tested restoring backups. No solution. What I did exactly was restoring containers from backups, turning off protection in case someting needs to be upgraded, reinstalled 'pve-container', rebooted the node. Something must have changed concerning backups, because they are way more faster now...
  18. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Just in case it is relevant: apt install --reinstall libpve-storage-perl did NOT revert changes in /usr/share/perl5/PVE/VZDump/LXC.pm Maybe some files that should have been replaced during the upgrade to 7.1 were not upgraded? It's just a wild fairly uneducated guess. ;-)
  19. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Good morning (and thanks Dunuin for joining us)! I already did grep for "error" and "fail" - without success. Here's an non-mp0-mount config: And here's /etc/pve/storage.cfg : I'm going to try to restore containers from backups in order to see whether that turns anything into the good. ;-)
  20. LXC Container Backup Suspend Mode exits with rsync error 23 after upgrade to PVE 7.1

    Another thing I only noticed now is that snapshot mode doesn't work anymore for any of the other conatiners. They all fall back to suspend mode. Before upgrading to PVE 7.1, all containers exept the one with that bind mount worked in snaphot mode.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!