Search results

I use MC Midnight Commander

I have only one node that is not connected to the cluster. I followed the instructions I set a new name in nano /etc/hosts nano /etc/hostname nano /etc/postfix/main.cf reboot Next, through the MC, I entered the /etc/pve/nodes/ but copy (F5) didn't work. In the proxmox web interface, I saw...

Yes, the problem is solved. The problem was not proxmox, but the DHCP server. Proxmox had a MAC address of vmbr0 18:c0:4d:0a:03:2c and an IP address 192.168.1.3 DHCP had a different MAC address 6c:60:eb:90:bc:c4 assigned to the IP address 192.168.1.3

Probably no one would come up with that. I always use the static IP 192.168.1.3 for proxmox. I use pfsense firewall and in DHCP I have bind MAC with IP addresses. For the IP address 192.168.1.3, I had the MAC address from the previous Proxmox.

I installed proxmox 7.3 today. During installation, proxmox received an IP address from the DHCP server 192.168.1.19 (GW 192.168.1.1, DNS 192.168.1.1). I immediately updated proxmox. Then I edited the network configuration file. I changed the proxmox IP address to 192.168.1.3. I changed the...

00:00.0 Host bridge: Intel Corporation Gemini Lake Host Bridge (rev 03) DeviceName: Onboard - Other Subsystem: Intel Corporation Gemini Lake Host Bridge 00:02.0 VGA compatible controller: Intel Corporation GeminiLake [UHD Graphics 600] (rev 03) DeviceName: Onboard - Video...

proxmox-ve: 7.1-1 (running kernel: 5.13.19-6-pve) pve-manager: 7.1-11 (running version: 7.1-11/8d529482) pve-kernel-helper: 7.1-13 pve-kernel-5.13: 7.1-9 pve-kernel-5.13.19-6-pve: 5.13.19-14 pve-kernel-5.13.19-5-pve: 5.13.19-13 pve-kernel-5.13.19-4-pve: 5.13.19-9 pve-kernel-5.13.19-2-pve...

Despite warnings that the firmware may be missing, the wireguard works great.

PVE 7.1-10 I created LXC (debian 11) and am currently installing wireguard. The installation will end fine, but I can see during the installation. That's all right ? update-initramfs: Generating /boot/initrd.img-5.10.0-12-rt-amd64 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125b-2.fw...

Yes, I have these SSDs connected via USB 3.0 ports. If I create a single ZFS pool from one SSD, everything works perfectly. But when I create a ZFS mirror, then there is a problem.

proxmox-ve: 7.1-1 (running kernel: 5.13.19-5-pve) pve-manager: 7.1-10 (running version: 7.1-10/6ddebafe) pve-kernel-helper: 7.1-12 pve-kernel-5.13: 7.1-8 pve-kernel-5.13.19-5-pve: 5.13.19-13 pve-kernel-5.13.19-4-pve: 5.13.19-9 pve-kernel-5.13.19-2-pve: 5.13.19-4 ceph-fuse: 15.2.15-pve1 corosync...

My attempt looks like this zpool attach datapool usb-WDC_WDS_100T2B0A-00SM50_98765432100C-0:0 /dev/sdd pool: datapool state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a...

The last option for me is? zpool attach datapool /dev/sdd /dev/sdc This can make for a reboote problem

Not shown ls -l /dev/disk/by-id total 0 lrwxrwxrwx 1 root root 9 Mar 9 08:42 ata-Samsung_SSD_870_EVO_250GB_S6PENJ0RB40583V -> ../../sdb lrwxrwxrwx 1 root root 10 Mar 9 08:42 ata-Samsung_SSD_870_EVO_250GB_S6PENJ0RB40583V-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Mar 9 08:42...

My previous post shows the results from smartctl, where is the line LU WWN Device Id: I assume this is the correct parameter. BTW can the command look like this? zpool attach datapool /dev/disk/by-id/5x001b448bbf8f4ce /dev/disk/by-id/wwn-5x001b444a7d765f3

OK so sdc - new disc === START OF INFORMATION SECTION === Model Family: WD Blue / Red / Green SSDs Device Model: WDC WDS100T2B0A-00SM50 Serial Number: 2118H3452512 LU WWN Device Id: 5 001b44 4a7d765f3 Firmware Version: 415020WD ... sdd - existing disk in datapool === START OF...

What should I do if both disks have a by-id of the same name. ls -l /dev/disk/by-id total 0 .... lrwxrwxrwx 1 root root 9 Mar 7 19:07 usb-WDC_WDS_100T2B0A-00SM50_98765432100C-0:0 -> ../../sdc lrwxrwxrwx 1 root root 10 Feb 27 07:37 usb-WDC_WDS_100T2B0A-00SM50_98765432100C-0:0-part1 ->...

I placed DVB cards in PCIe 16x and now there are separate IOMMU groups. Big thanks avw

I added devices via GUI. My config in the previous post does not contain these lines. Then when proxmox froze I removed the rows. Does this mean that IOMMU groups are given BIOS? Can't I change it? DVB devices are designed for PCIe 1x. I tried to put the device in another slot, but nothing has...

Proxmox 7.1 HW: MotherBoard (IOMMU enabled) CPU TBS6909 DVB-S2 8 Tuner PCIe Card TBS 6925 PCI-E DVB-S2 TV Tuner Card lspci 07:00.0 Multimedia controller: TBS Technologies DVB Tuner PCIe Card 08:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03) I want to use DVB cards in VM...