Search results

  1. CEPH does not mark OSD down after node power failure

    Did you sort this out? I experience the same thing
  2. [SOLVED] [NETWORK] Routing with MASQUERADE from vm lans to wan interface not receiving traffic

    Indeed vmbr0 with dhcp config messes up SNAT. Any idea why? Is the dhclient process doing something special?
  3. Step by Step Install w EFI, ZFS, SSD cache, File Server

    Is this still needed in 6.3? I am just testing proxmox on a new server and trying to follow your steps I see the partition layout built by the installer is not the one described in your post and it seems that it just works out-of-the-box (I mean raid1 zfs). I am using some 2x SATA DOMs which are...
  4. pvestatd missing metrics in influxdb

    Hi, I have a similar problem, the pvestatd only reports the storages to influxdb: > show series key --- system,host=NFS1,nodename=proxmox,object=storages,type=nfs system,host=local,nodename=proxmox,object=storages,type=dir system,host=slow6,nodename=proxmox,object=storages,type=dir...
  5. Failed deactivating swap /dev/pve/swap

    Hi, I face the same thing on an Intel server
  6. [SOLVED] Missing datas with External Metrics

    I have this problem as well, I only have series from the storage part (some dirs and a nfs one). It used to work ok, but it stopped a few months ago. I have completely deleted and reinstalled influxdb and with a fresh database (proxmox) and I only get the series for the storage. I have made...
  7. HA migration on node failure restarts VMs

    I was confused about the term "HA" at the beginning. I usually handle the networking part and I am used with technologies from Cisco: HA with NSF and SSO, which means a full controller is actively replicated to the standby one and it can do stateful-switch-over if it crashes. In Proxmox/RHCS...
  8. 2-node HA DRBD Concurrent local writes

    Yup.. good finding. As far as I tested with a guest VM only writethrough and writeback avoids those messages. With directsync for example I still have them.. You have to stop the VM so that the new caching kicks in.. Let me know what are your test results..
  9. 2-node HA DRBD Concurrent local writes

    Hello, Once in a while I was getting this warning in dmesg ( kern.log ): block drbd0: kvm[433746] Concurrent local write detected! [DISCARD L] new: 623356039s +8192; pending: 623356039s +8192 So I decided to study it more and I was able to trigger message whenever I was running sqlio benchmark...
  10. Spice unusable after 3.2 update

    Thank you, that solved it :)
  11. Spice unusable after 3.2 update

    Hello, I have this version up and running: proxmox-ve-2.6.32: 3.2-124 (running kernel: 2.6.32-28-pve) pve-manager: 3.2-2 (running version: 3.2-2/82599a65) pve-kernel-2.6.32-28-pve: 2.6.32-124 pve-kernel-2.6.32-26-pve: 2.6.32-114 lvm2: 2.02.98-pve4 clvm: 2.02.98-pve4 corosync-pve: 1.4.5-1...
  12. Using a NIC for a KVM

    Look for pci passthrough
  13. Resizing root partition and giving proxmox more space

    You have to resize the filesystem as well.. you just resized the underlying layer.
  14. Resizing root partition and giving proxmox more space

    https://pve.proxmox.com/wiki/Debugging_Installation
  15. Two-Node High Availability Cluster - planning

    You need to have fencing and quorum. Either with qdisk or with a 3rd not that can be used only for quorum.
  16. How to add vmbr's without rebooting the whole Node?

    Use vconfig, ifconfig and brctl as needed to bring up your bridges.
  17. How to disable nf_conntrack completely

    I doubt that your server crashes because of conntrack table filling up.. Better try to find out what is the panic message you see about..
  18. Two-Node High Availability Cluster - planning

    Take a look at this thread: http://forum.proxmox.com/threads/17382-HA-migration-on-node-failure-restarts-VMs
  19. start VM's before lvm and iscsi attached

    Try to setup insserv overrides through /etc/insserv/
  20. windows 7, spice, and sound

    I have such a setup and on the guest machine I have the qxl drivers and spice guest tools.. Sound works nicely when connecting via remote viewer

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!