Search results

  1. SR-IOV and BSD (PFSense, TrueNAS Core) reset_hw() failure: Reset Failed!

    I found that from way back in 2016, I'd be very surprised if it isn't already patched in TrueNAS Core, pfSense, and Upstream FreeBSD, especially since the pfSense download I have is from 2022-02-14.
  2. SR-IOV and BSD (PFSense, TrueNAS Core) reset_hw() failure: Reset Failed!

    I unchecked PCI-Express, and I even tried changing the machine type back to i440fx, and the error message is the exact same error message. No change, no success.
  3. SR-IOV and BSD (PFSense, TrueNAS Core) reset_hw() failure: Reset Failed!

    So I'm trying to evaluate SR-IOV on a test server (Dell R620, dual E5-2670v2, SR-IOV, VT-D, etc all enabled) and everything works on a Linux guest, but I'm getting the following error whenever I attempt to boot up a BSD appliance guest. The NIC is an Intel X520 based Dell rNDC, and AFAIK is...
  4. [Tutorial] Run Open vSwitch (OVS) + DPDK on PVE 7.0

    Do we have enough support in the package yet to just check a checkbox on a VMBR and mark it as DPDK enabled yet?
  5. Proxmox VE 7.2 and Solaris Kernel?

    This happens from the installer ISO as of downloads on Friday 2022-05-13. I don't have version numbers handy. Install -> Update sounds like a viable workaround to me. Thank you m.frank.
  6. Proxmox VE 7.2 and Solaris Kernel?

    I'm trying to evaluate some Solaris based programs (OmniOS and NexentaStor) that are based on current Solaris Kernels. The long term goal is to pass through an HBA to these systems in PCIE mode, so I would want the Q35 VM mode. However, when configuring these VMs with a Q35 machine type, both...
  7. LSI SAS2308 SCSI controller: Unsupported SA: 0x12

    This is not related to the SAS controller. This is a bug in the iSCSI target and/or QEMU's iSCSI initiator implementation. I've opened a bug with Proxmox to resolve this. https://bugzilla.proxmox.com/show_bug.cgi?id=4046
  8. ZFS over iSCSI backend recommendations?

    Dude, fibre channel is awesome! I wish they would extend the zfs over iscsi to be zfs over fc with npiv portability. I don't care if the npiv is attached to the VM sriov style or to the host qemu. Either way, it would truly be awesome and would enable truly enterprise level SAN support in...
  9. ZFS over iSCSI backend recommendations?

    Went to try it out today. Project looks dead. D. E. D. Dead. Repo is down, project owner not responding to tickets or inquiry as to when it'll be back.
  10. ZFS over iSCSI backend recommendations?

    No, OmniOSCE is obscure Again, OmniOS less documented.
  11. ZFS over iSCSI backend recommendations?

    Meaning no offense, but replacing a common general purpose server os with an obscure general purpose os, while probably very stable and suitable at the enterprise level, is hardly a step up for the smb/soho environment that's looking for a set it and forget it appliance. It's the sort of thing...
  12. ZFS over iSCSI backend recommendations?

    I didn't follow any documentation or guide. I read the included manual to make sure I was pasting the correct values in the correct boxes, but that's it. Targetcli is pretty basic really, once you've used it for a few years
  13. ZFS over iSCSI backend recommendations?

    So I'm looking into using ZFS over iSCSI, and I'm trying to find a good target. I've tried both TrueNAS Core and TrueNAS Scale, but both fail on a missing CLI utility. Being an appliance, I don't trust them to continue functioning through an update if I forcibly install those CLI utilities...
  14. VM Start Timeout

    So some of my VMs take longer to start than others. Typically if I either pass in a PCIE device or use a lot of memory, but most frequently when I do both. Example output is below, but the key error is: failed: got timeout. If I run the command manually, it always works out and loads...
  15. Qdevice for Non-HA cluster?

    So I'm pretty sure I know the answer. I'm building a very small cluster for now. Two nodes. One hosts the NAS and SAN and a few other 'infrastrcture-y' things. The other hosts most of the VMs that I want to boot *from* the SAN. I can manually migrate them from the service node to the infra...
  16. SAN boot and dynamic auto-configuration?

    Is it possible at this time to configure a proxmox cluster such that a host machine can boot over the SAN (iSCSI or NFS) using a genericized, Read Only image, then once it boots, it gets its identity information via DHCP or TFTP or similar to know its hostname and any other essentials, then it...
  17. NPIV (vHBA) on proxmox

    Is there a way to enable NPIV or vHBA on Proxmox, or is this on the roadmap? I need this for an expansion I have planned, and SCSI device passthrough is unlikely to be sufficient. The plan is to build a new SAN host with two distinct vSAN arrays, and connect them both to the Fibre Channel...
  18. Schedule jobs for boot, or start from CLI

    I'm looking to run a second PBS server separate from my main, and have it just power up in the middle of the night (I've got this working), then immediately kick off a sync job, then a verify, then a prune/GC, then, if the start up time was the scheduled time, also automatically shut down when...
  19. Any info on a Promox Linux installer and management system?

    I really like Proxmox' Web Gui and the way the installer manages configuring ZFS for boot, with both mirroring and ESP configuration, disk status and smart, ceph, firewall, and the whole general UI to manage a lot of basic things. I would use it for a select subset of my infrastructure in my...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!