I have a fresh installation of proxmox 6.4-13 on a Samsung 980 Pro NVME combined with a PCIe4 motherboard.
Speed should be blazing fast but when I do a test the results are really poor.
This is from proxmox ve shell:
root@node1:~# fio --ioengine=libaio --direct=1 --sync=1 --rw=read...
In the "ID of container".conf file, you add I think to whatever you want. But you can add the "highest" folder to allow all the below ones.
And in Proxmox rules, you assign then the USB according to product ID etc.
This way it doesn't matter if you change port.
But if you have more that one of...
I had the previous post written while I was trying different stuff but not posted it yet. Since it was true at the time I wrote it, I posted it now.
However.. I did not get the other stick to work.
After MANY hours I managed to work things out.
This stick creates in proxmox a folder "usb" and...
I have tried several things, clean reboot of both the LXC and proxmox.
And now.. it started working.
And I do not know WHY it started working.
For future reference.
my LXC configuration added:
lxc.cgroup.devices.allow: c 166:* rwm
lxc.mount.entry: /dev/ttyACM0 dev/ttyACM0 none...
Thanks for replying.
I tried that (as well) but did it again. I noticed you had SUBSYSTEMS with an S in the end so I thought that would be it.
But unfortunately no.
I can add the usb easily to VMs via "add hardware" but not in LXCs. Its driving me mad!
I'm at my wits end.
I want to pass through a USB device (for instance my UPS is connected via USB and I have other devices like z-wave and zigbee as well).
This is what I do (and is according to proxmox manual and all tutorials out there):
Create a LXC container (debian 10 or ubuntu 20...