Thank you. Outputs are below.
Should I initialize the disk with gpt via the ui?
I am running the long smart tests now.
smartctl (also incl as screenshot)
=== START OF READ SMART DATA SECTION ===
Error counter log:
Errors Corrected by Total Correction...
Yes sorry should have included that - this is the message I get (when I wipe all drives)
wiping block device /dev/sdc
dd: fdatasync failed for '/dev/sdc': Input/output error
200+0 records in
200+0 records out
TASK ERROR: error wiping '/dev/sdc': 209715200 bytes (210 MB, 200 MiB) copied...
I have been trying to set up my storage using a group of 900gb SAS drives in raidz(1) - and everythime I create it I am getting the error messages below.
I am just not sure how to do what it is saying I need to do, can anyone please help?
Edit: it is not just sdc, I tried to create a POOL...
I had a proxmox node on an R720 with a std H710 (not in IT mode), made some mistakes and decided to just "nuke" it and start over, and this time give ZFS a try.
So with original H710 (w/o IT mode installed) Cleared configs, initialized disks, deleted as much as I could/knew how to on those SAS...
I have two servers, one I have had for awhile, been running it using hardware RAID (RAID1 for boot and RAID6 for everything else)... however I have been reading about ZFS and would like to try it with my new server. However just wondering if there would be any issue having one proxmox node...
Yeah I was able to succefully add all the drives to my RAID6 array, but in the previous array config before I deleted my VD somehow, there were less drives. Both times it was RAID6, all the other configs for the array were the same, just this time I added some more drives.
So I should
Some context before I jump right in the issue.. (also am learning as you can tell by the below, so sorry if there is an easy solution - fingers crossed - or if I am leaving out very important information) Also, no I don't have back ups... I have drives, etc.. just haven't done it yet..
Thank you, quick question why does the GUI does it say 3200+ GB but I only have 20gb available to the VM? What is the difference?What is using/rather what is able to use the 3tb I gave it at set up? How do I change the 20gb value when I set up a VM initially? I don't remember ever picking 20gb...
Thank I will review this today. As the other reply mentioned most of my screenshots were from host not guest, I added df -H from the guest in my post and replied with it attached here in case it provides some clarity to any help you can provide.
Thank you I thought I provided from the guest must have missed that screenshot. Just uploaded it to my post. But here it is on this reply too.
I don't what all those /loop"s are and I don't see the 3tb I gave this guess from the proxmox gui. I assume the issue is the 20gb on the Ubuntu line?
I have been running a VM and a few containers on my VM105 but when I tried to install "net-tools" on my Ubuntu VM I got this error message: "E: You don't have enough free space in /var/cache/apt/archives/."
I have plenty of storage but apparently I have added it/mounted it incorrectly...
Thanks for the reply
here is the output from the CLI
I am setting up a Ubuntu server VM and getting the following error on launch
Error: Unknown device type.
can't create interface fwln101i0 - command '/sbin/ip link add name fwln101i0 mtu 1500 type veth peer name fwpr101p0 mtu 1500' failed: exit code 2
Yes HW raid.
I have 96gbs in the R620 and when it's ready the R720 will have 192gb. I think that would be plenty but not sure what I gain/lose with ZFS otter than starting over (not that I've done much).