I have a weird problem here. Sometimes the IPv6 connectivity of VMs is broken.
In this case the Router send ICMP Neighbor Solicitations to the VM, but doesn't get a response back, so the neigbor entry for these VMs are in failed or incomplete state on the router.
After capturing a bit it...
wir haben ein 3-Node CEPH/PVE Cluster (PVE 6.4-5/ CEPH 15.2.11) und haben ein paar Ausfalltests durchgeführt. Dabei ist uns aufgefallen, dass CEPH quasi gar nicht mehr reagiert, wenn die Links vom CEPH Public und CEPH Cluster Netzwerk down sind. Also auch die (pve-)ceph. Befehle geben...
uns ist aufgefallen, dass auf unserem 3-node Ceph-PVE-Cluster (PVE 6.4) auf jedem Knoten teils unterschiedliche Server Addresses verwendet werden: Server View -> Datacenter -> Summary -> Nodes.
Unsere Nodes haben natürlich mehrere IPs (GUI, Corosync, Ceph Public, Ceph Storage...
we have a fresh 3-node PVE-CEPH-Cluster running PVE 6.4-4 and we have done some redundancy Tests, yesterday.
Each Node has the following separated Networks:
1GBit/s Port - > GUI VLAN (routed) -> 10.1.0.0/27
1GBit/s Port - > Corosync VLAN (only L2) -> 10.1.1.0/27
we have PBS up and running to backup our virtual machines via the PVE integration.
But now we want to backup other linux hosts as well and I have some questions:
1. We have an enterprise subscription for PBS. Is it possible or planned that the PBS Enterprise Repository is available for...
I'm struggling with multipath and lvm configuration. I know it is not directly related to PBS, but on this there runs PBS 1.0.11 (Enterprise subscription).
I want to use a SAN LUN (Multipath with 2 links) as a physical volume, to run LVM on that and use it as a Datastore for PBS.
I'm new to PBS, we have installed a PBS instance to backup our 3-node Proxmox/CEPH Cluster.
We have configured a user on PBS for the VE integration with permission "DatastorePowerUser" on the exact datastore for the VE Cluster. Is this sufficient as least privilege?
How does the...
we have set up a 3-node Proxmox VE/CEPH Cluster with one network/VLAN/IP-range for both public and cluster network.
Now we decided to separate public and cluster network into 2 VLANs/IP ranges.
1. Is there a way to do this in an easy way? (we don't have workload, yet - so service...
we are planning to use SAN for Backup Storage in PBS. Just, because we have a spare SAN Storage to use.
Because of SAN the PBS will see one big Block Device. Any recommendations how to use this big block device, what filesystem should we use?
I have read it is recommended to use a...