Search results

  1. e1000 driver hang

    Ok, many thanks for patience and explanation. I will try and test what I can achieve. Anyways, maybe someone will stumble upon this topic and provide definite solution. That is pretty frustrating experience TBH ;)
  2. e1000 driver hang

    If I run "ethtool -K eno1 tso off gso off" manually I get following changes: tcp-segmentation-offload: off tx-tcp-segmentation: off tx-tcp-ecn-segmentation: off [fixed] tx-tcp-mangleid-segmentation: off tx-tcp6-segmentation: off udp-fragmentation-offload: off...
  3. e1000 driver hang

    That's just the comment :)
  4. e1000 driver hang

    Strangely, when I apply post-up to both interfaces only 'tx-tcp-mangleid-segmentation: off' line changes. root@pve:~# ethtool -k eno1 Features for eno1: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: off [fixed] tx-checksum-ip-generic: on tx-checksum-ipv6...
  5. e1000 driver hang

    Not here, unfortunately :( I did exactly the same as you did (just applied to eno1 instead of eno2). Even now just repeated the steps that you did and the result of diff is blank (nothing).
  6. e1000 driver hang

    Thanks for explanation. Tried that now, but the result is the same :/
  7. e1000 driver hang

    Ok, I misunderstood your post – my fault. I tried that once more – applied the line only to eno1 interface. auto lo iface lo inet loopback iface eno1 inet manual post-up /usr/sbin/ethtool -K $IFACE tso off gso off 2> /dev/null auto vmbr0 iface vmbr0 inet static address...
  8. e1000 driver hang

    Yup, I noticed that after a while. But even after restarting the VM's and containers I did notice really strange behaviour in Home Assistant VM. Maybe that was not related to this issue or workaround, just a coincidence. Right now I rolled back because of lack of time. I will try again tomorrow...
  9. e1000 driver hang

    Oh man, I just run into many problems after applying this workaround. Really, big time. I don't know what might happened but my VM's, especially the one with smart home instance (Home Assistant) got messed. I was loosing connectivity to this VM (Web UI wasn't responding or loading), I also...
  10. e1000 driver hang

    Oh, ok. I don't do passthrough because couple of VM's make use of this 'real' interface. I also don't have direct access to the host. That's my only NIC and I run NUC in headless mode. Loosing connectivity would be highly problematic then ;) I guess I'll run some "stress tests" and will see how...
  11. e1000 driver hang

    Thanks. Can you point me to the best way to check if this workaround resolved the issue on my setup? I've previously tried uploading/downloading large files to/from the network drive hosted on my NUC. I also tried iperf3. However, none of those tests make me 100% sure as this issue seems to...
  12. e1000 driver hang

    Ok, so it worked only after I put it under both interfaces (eno1 and vmbr0). Heres the output: Features for eno1: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: off [fixed] tx-checksum-ip-generic: on tx-checksum-ipv6: off [fixed] tx-checksum-fcoe-crc...
  13. e1000 driver hang

    Sorry, forgot to tell that it's output from current state, without the fix. I will try, test and report back soon.
  14. e1000 driver hang

    Many thanks! I would also appreciate if you could indeed come back with your observations/experience. Thanks. Here's the output: root@pve:/sbin# ethtool -k eno1 Features for eno1: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: off [fixed] tx-checksum-ip-generic: on...
  15. e1000 driver hang

    Thanks for a real quick answer! Is there any drawback from applying post-up to both interfaces? I've seen (here: that it may not work if applied only to 'real' interface. Regarding your example. While I clearly understand...
  16. e1000 driver hang

    Hello there! I'm experiencing the same issue on NUC8i3BEH with I219-V NIC. Can someone please advice me if I'm applying the fix properly? Here's what I have on PCI: 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (6) I219-V (rev 30) Subsystem: Intel Corporation...
  17. Passhtrough 8gen intel Nuc

    I've succeeded :) Check this out: Config from the last post seems to work!
  18. Passhtrough 8gen intel Nuc

    Hey! I'm trying to passthrough my NUC's GPU and audio to Ubuntu VM as well. Did you succeeded? Can you share your VM configuration?


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!