i just apt-get dist-upgrade and i see this in the log:
> Installing new version of config file /etc/vzdump.conf ...
> Failed to preset unit: File /etc/systemd/system/pve-manager.service already exists and is a symlink to /dev/null.
> /usr/bin/deb-systemd-helper: error: systemctl preset...
since moving to proxmox 2.0 one of the vm guest freezes twice a day, vm cpu shows 100%, network seems stopped.
vm guest is a debian 5 x64 with plesk
I've tryed to switch the clocksource after reading http://wp.libpf.com/?p=373 (grub 1 version) but it won't boot (vm hangs while loading...
I'm using a fresh install of proxmox2 (from ovh), upgraded to latest version.
When using CreateVM / CreateCT the "node" drop down list has one entry with no name, and when selected the dropdown stays empty with an error : "Node seems to be offline! Field is required":
What has gone wrong and...
I'm trying to switch a slave node of a cluster into a single master node (as in a new fresh install of proxmox).
I've manually stopped the cluster sync and tunnel services on both nodes, then removed the cluster configuration also on both nodes. I also told the slave node to become a...
I'm have a cluster with 2 nodes.
The cluster was created for live migration of vms from an old server (master node) to a new server (slave node).
Now i want to stop the old server and use the new one for my cluster management, ie as the master node.
I've tryed "pveca -m" on the slave node...
I'm about to setup a proxmox ve cluster in my live environment.
I've read the http://pve.proxmox.com/wiki/Proxmox_VE_Cluster doc, but it says nothing about ipv6.
Is ipv6 supported as the "node" ip ?
as soon as i add a new virtual network card to the same bridge, the vm (Win2K8) can't see the outside world / even the host. No improvement if this new card is disabled in the vm.
If i remove the virtual card all works correctly.
If i add a new virtual network card to another bridge it...
On one server, when accessing my vm using RealVNC vncviewer, the vm stops abruptely.
The vm is a Windows 2008 R2 server.
Another vm on the same server has the same bug.
kvm: segfault at 7fffced77688 ip 000000000041b264 sp 00007fffce552100 error 6 in kvm[400000+28a000]
Any fix for...
i've tryed with proxmox 1.7 and both kernels 188.8.131.52 and 184.108.40.206. Both do a segfault like this. The VM stops abruptely. In kernel 2.6.32 there is not log in syslog.
This happens only when the network is correctly configured in the VM.
Can it be the VM .qcow2 file that is corrupted ?
[fixed] time drift in all W8K guests
EDIT: see fix at the bottom thread in my last post
REOPENED: I wrote too fast.
The problem is still there.
EDIT: the following command fixed the problem.
For Windows 2008/R2 guests only (Windows 7 does not have any problem):
i understood that both options are for licensing questions.
In a quad core intel, there is 1 socket and 4 core.
With hyperthreading enabled there is 2x4 = 8 cores.
I answered my own question:
processor : 7
[fixed] rtc not in kernel ?
EDIT: rtc is ok in kernel 2.6.35
# dmesg | grep -i rtc
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
rtc_cmos 00:03: setting system clock to 2010-11-10...
[fixed] UI freeze when opening Storage tab if one of the NFS Share is not available
i have a dedicated server on a hosting, for which i subscribed a NFS Share option.
I mounted and added the NFS share using proxmox UI.
I unsubscribed the NFS option, and was unable to access the UI...
do you plan to integrate these drivers ?
How to update a running Proxmox install so it uses these drivers ?
Because I can not install the latest Intel's drivers in a x64 windows VM when this VM has a e1000 board set up ...