While doing a backup to an NFS mount I am shown
INFO: starting kvm to execute backup task
INFO: started backup task '7325d51d-bb44-4522-a72f-078cf08de2ce'
INFO: status: 6% (6646923264/107374182400), sparse 5% (5877727232), duration 57, 1238/0 MB/s
Is it safe to assume that the share is...
Is there by chance a "how to set mtu for dummies" guide?
I did some searching - found some perl code - in the forums - some referenced back to 1.x etc...
Sadly searching the forums since 2.x is out has been a bit more difficult
that being said here is what I need to figure out.
We have a...
We migrated some VM's in a cluster around the other day - and now we cannot pull up the RRD stats.
we ran /etc/init.d/pvestatd restart
but the next day nothing.
# pveversion --verbose
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve...
While trying to do a backup We are getting a strange error:
trying to remove stale snapshot '/dev/pve/vzsnap-xanadu-three-0'
INFO: umount: /mnt/vzsnap0: not mounted
ERROR: command 'umount /mnt/vzsnap0' failed: exit code 1
when running mount I see:
/dev/mapper/pve-root on / type ext3...
I have spent some time searching online for this answer - but to no avail - so here goes.
I went to transfer container # 106 which was using local storage to another host node.
The configuration file migrated just fine - BUT NOT THE STORAGE
Now - I have storage on 1 system and the...
In Proxmox VE 2.2 is it possible to disable VZQuota for something that once ran a quota.
I have set Quota to ZERO but even so - when the system reboots (not clean) it goes into a vzquota check.
While its great to have quota's this VM does not need it and the clients hardware is having some...
I hope this finds everyone well.
I am trying to find what is the best way to install Proxmox onto a drive array that has over 2+TB of storage.
I have a bunch of 3TB Drives that I would love to install Proxmox onto.
The hope is of course to use my ISCSI raid array for the actual VM's however...
AlienVault Open Source SIEM (OSSIM) is a complete Security Management solution that detects and profiles attacks, and provides a comprehensive, intelligent Security Management platform and toolset.
The entire solution is composed of open source distributions including all seamlessly...
After reboot the network interfaces are not found.
I was able to find 1 by going in and editing /etc/networks/interfaces and changing eth0 to eth2
restarted network and voila - worked...
however now - it does not
any ideas - as this is getting tiresome...
i have 4 vps down on this node...
I have tried a few things - but sadly I am not able to figure out how to mount two 4TB drive arrays ...
I have thought about breaking them down to be smaller - but we would loose the ability to have a raid 60 array that way
There is a simple way to install an IP Calculator @ the command prompt for Debian users.
# apt-get install ipcalc
I am thinking a simple cgi-wrapper like here: http://jodies.de/ipcalc_cgi
would work wonders - pretty easy to add - and might help when folks are looking @ subnetting on their...
I am looking into writing a module for a common billing system so that we can setup auto-creation of vps'
We are looking for what the actual commands are (since i have not seen an api as of yet) that can be used to create these
In short - we would be using the canned openvz templates
Unable to upgrade
seeing the following:
dpkg: error processing pve-manager (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on pve-manager; however:
Package pve-manager is not...
Those that are looking for a simple how-to for making an opensource iscsi -
this might help http://www.hostmedic.com/admin/storage/san-wo-the-cost-centos-iscsi/
Also - has anyone drooled over this bad boy? 67 terabyte 4U server self built for under $8K I think its amazing - and of course...
ERROR: CFG Error in "workdir", line 8: Working directory /var/www/mrtg does not exist
After upgrding a system to 1.3 we are seeing this error every 5 minutes from cron.
not sure if its something new - figured I would ask here -
google shoes some ubuntu issues - (debain based as well )...
We are using an Adaptec Raid Card (3105)
8 Core Xeon Server
We have 8 drives connected in Raid 50 (Seagate 7200Sata)
The IO Load when doing a backup however we are seeing IO Load over 70% at times
On another system I tried to configure differently -
set each drive up in a new array...
I recently added 2 systems together in a new cluster
the issue is - there now are vmid 101 on both servers
how can I change one of those - so we can do live migrations ?
searched the wiki - but no result :-(