Search results

  1. Zabbix in a ProxMox container. Is this possible?

    while not exactly the same, we have observium in an lxc container. No special configs. Give it a try and post up any issues!
  2. ubuntu vm arm

    OK finally got everything working, i think. I have no idea why, but the Aarch hates the efi disk that is created by the gui. I had to skip the GUI efi disk add, edit the config /etc/pve/nodes/<host_name>/qemu-server/<vm_id>.conf arch: aarch64 remove vmgenid: change any ide<#> to scsi<#> then...
  3. ubuntu vm arm

    Confirmed, removal of the EFI disk does not impact booting from local disk in the VM.
  4. ubuntu vm arm

    Removing the EFI disk seems to allow it to boot, Maybe the EFI disk is too small? Will continue to troubleshoot
  5. ubuntu vm arm

    looking through the code for sub get_ovmf_files($$$) { my ($arch, $efidisk, $smm) = @_; my $types = $OVMF->{$arch} or die "no OVMF images known for architecture '$arch'\n"; my $type = 'default'; if (defined($efidisk->{efitype}) && $efidisk->{efitype} eq...
  6. ubuntu vm arm

    I as well :-) will post up if a solution is found
  7. LXC for gitlab runner

    Sounds like you are both new to proxmox and gitlab. I would suggest you do a deep dive in both. To get you started, I would first create an LXC on proxmox and install the runner directly on it. When you register the runner, set it for...
  8. [SOLVED] Failed migration, lack of unused storage on desc server.

    Still helping folks with this years later :-) mostly commenting so i can find this later if needed
  9. NFS option nconnect

    root@manifold:/mnt/pve# pveversion -v proxmox-ve: 7.1-1 (running kernel: 5.13.19-1-pve) pve-manager: 7.1-4 (running version: 7.1-4/ca457116) pve-kernel-5.13: 7.1-4 pve-kernel-helper: 7.1-4 pve-kernel-5.4: 6.4-7 pve-kernel-5.13.19-1-pve: 5.13.19-2 pve-kernel-5.4.143-1-pve: 5.4.143-1...
  10. NFS option nconnect

    Hey Folks, I wanted to try out the nconnect option for NFS mounts and am having trouble adding this correctly. nfs: XXXXX_nfs_image_store export /mnt/XXXXXX path /mnt/pve/XXXXXXXX server 10.0.XXXXX content iso,vztmpl,backup,images options vers=3,nconnect=16...
  11. LXC and passing USB audio

    i guess let me start by asking has anyone successfully passed through a USB device to a container? If so, can you post your setup? Doesnt have to be an audio device, ANY usb device
  12. Management vlan on bond0

    To get a better picture, what are the other 3 interfaces connected to? The above config only uses a lagged ens4f0 and ens4f1, is that expected? It also sounds like you want the reverse of what i have. Management on tagged vlan (looks like and the tag is 69? Your first config...
  13. k3s on lxc - modprob: FATAL: Module overlay not found in directory /lib/modules/5.13.19-1-pve

    also check this as a resource to see if any steps are missed
  14. k3s on lxc - modprob: FATAL: Module overlay not found in directory /lib/modules/5.13.19-1-pve

    Sorry, i see you are running lsmod on the containers, the main server (pve1 in your case) is what will need its /etc/modules-load.d/modules.conf edited. Can you confirm that this is the case? Also maybe its the screen shots, but there should be an _ (underscore) between nf_nat br_netfilter...
  15. Management vlan on bond0

    Hey, So ive got this working, there are a few pieces of the puzzle, i dont know what you know so forgive me if i go into too much detail, please pic kout the parts that interest you. Setup: i have 3 proxmox hosts. management vlan is set on the vlan tag of 10 subnet. We are going to...
  16. Does Proxmox support RoCEv2 (RDMA)?

    Not official, and have no idea how it will interact with Proxmox, however, was a good resource for us in a slurm cluster.
  17. No network after pve6 to pve7 upgrade

    i had a similar issue, i had to add auto to my interfaces like so auto lo iface lo inet loopback auto eno1 iface eno1 inet manual mtu 9000 auto eno2 iface eno2 inet manual mtu 9000 auto bond0 iface bond0 inet manual bond-slaves eno1 eno2 bond-miimon 100 bond-mode 802.3ad...
  18. k3s on lxc - modprob: FATAL: Module overlay not found in directory /lib/modules/5.13.19-1-pve

    I havent read the links above, however, make sure you have the overlay added to your module.conf, here is mine, I run k8s and k3s in LXC root@manifold:~# cat /etc/modules-load.d/modules.conf # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules...
  19. LXC and passing USB audio

    Adding a bit more, i use this Plantronics calisto on debian 10 laptop and works well aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC257 Analog [ALC257 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3...
  20. LXC and passing USB audio

    Hey Folks, Long-ish thread, TLDR trying to pass through a USB audio device to an LXC container and am having a hard time with it. It might be a pulse audio issue but looking for advice. As to the inevitable WHY, well, because. Yes i know this is easier in a VM. I use nomachine to connect to it...


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!