According to https://forum.proxmox.com/threads/mail-object-test-button-not-working.78899/post-349390 regexes should implicitly be anchored, but it seems to me this is not the case (anymore), see screenshot. I would expect the test to fail.
I know I can simply change my regex to start with ^...
we currently get a lot of spam where the subject contains part of the email adress the spam is sent to. It's already filtered after passing PMG, but I'd like to not accept the mail at all.
Example for "email@example.com": "j doe You want this"
- Text varies
- First part is always the email...
Well, it's directly related to post #7 in this thread and I already posted all relevant information before (imho).
Maybe also related to your post #12: I have used the documented configuration where you first add a iSCSI storage and then put LVM on top of it. Your post seems to propose adding...
We have an internal HP MSA2040 SAN where I can configure email settings to send notifications, but unfortunately the system doesn't allow to configure any other port than 25. As the system doesn't send a HELO, connections are denied:
postfix/postscreen: CONNECT from...
Sorry, forgot to mention that I was testing again (pulled the cable for which the IP address is registered in the hosts file). So, the cause is clear.
Unclear for me is if that's a problem in some way (as everything seems to be working fine) or if I should configure it differently.
I just noticed that while the VM is still running, in PVE I have a question mark above the LVM storage "SAN_LVM_LUN01" and get an error message "storage 'SAN' is not online (500)' ("SAN" being the higher level iSCSI storage).
Reason for this probably is that /etc/hosts only contains one of the...
Danke für die Vorarbeit! Hier alle notwendigen Schritte im Überblick:
2FA aktivieren: https://support.google.com/accounts/answer/185839
App-Passwörter einrichten: https://support.google.com/accounts/answer/185833
App auswählen: E-Mail
Gerät auswählen: Andere > "Proxmox Mail Gateway...
when opening a console of a VM, it used to open noVNC per default. Now, probably after the update from 7.1 to 7.2, PVE downloads a spice file "pve-spice.vv".
According to https://pve.proxmox.com/wiki/SPICE:
"Spice is not enabled by default. To enable it set the Display in the Hardware...
1a) And I would need to have a different set of disks for every LUN, as it's probably not possible to have two LUNs on the same RAID/disk group, is it?
Multipath is already configured. I have configured the iSCSI storage with an IP address that is available on Proxmox node A. We are using DAC...
Thanks, I found another blog article recommending this, so switched to using a separate subnet not only for each host, but for each port (2 hosts = 4 different subnets). No need for routing or specifying the interface when pinging the target.