An update the post.
I had the same problem on a fresh install of the latest releases of PBS and PVE, both enterprise repos.
The procedure was:
Install Proxmox VE, fresh install from latest .iso
Switch repository to PVE enterprise repo
Install PBS with community repo
Switch repository to PBS...
I mean if I can edit the file (where is it?) in which the parameters are written and then eventually reload it in some ways, instead of using command line to set it at runtime, just to remember that I set it in case of cluster upgrade/migration.
But command line is fine too.
I agree, but when different systems, like servers and storages, start at the same time, there could be a misalignment of some minutes.
The retry actions to mount the storage nfs and start a vm how long will go after PVE node boot?
The shared storage was also badly switched off during the power loss, so it could be possible it would take some time to boot and recover properly.
We have a 3-node production Cluster (enterprise repo) with Dell PowerEdge r740XD with both local and shared storage.
After power loss in the datacenter VM on Proxmox cluster didn't start at boot, even if Start at boot is set to yes.
proxmox-ve: 7.1-1 (running kernel...
I checked on Dell site: https://www.dell.com/support/kbdoc/en-it/000175879/support-for-openmanage-enterprise?lang=en
There is a virtual appliance for KVM too for Dell EMC OpenManage Enterprise.
Did anyone deploy it on Proxmox 7? How big should be the qcow2 hard disk to configure the new vm...
# apt install --reinstall proxmox-backup
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following NEW packages will be installed:
0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
Need to get 2,820 B of...
I don't have third party repository, the output of the commands are:
Get:1 http://security.debian.org bullseye-security InRelease [44.1 kB]
Hit:2 http://ftp.it.debian.org/debian bullseye InRelease
Get:3 http://security.debian.org bullseye-security/main amd64...
we have a DELL R740xd server with both PVE (7.1-10) and PBS (2.1-4) installed with Enterprise repository.
It was a fresh install from PVE recent iso, then enabling PVE enterprise repo and PBS non-enterprise repo. Finally today we disabled PBS non-enterprise repo, then enabled the enterprise...
We are going to set up an environment with 2 servers, one for production use with PVE (PVE1) and the second with both PBS and PVE (PVE2, used for restore of PVE1 VMs in case of DR) installed.
PVE1 server will backup many VMs to a datastore (datastore1) on the PBS server.
The goal is to provide...
We had problems with active-backup bonding with BCM57412 NetXtreme-E 10Gb in Dell R740xd and VLAN.
Ethernet Channel Bonding Driver: v5.11.22-4-pve
Active-backup bonding did't work with VLAN if the bonding was on different network interface cards. After disconnecting...
did anyone set up a Proxmox 6.0 controlled shutdown with PowerChute Network Shutdown v4.3 (APC SmartUPS 3000 RM with a Network Management Card) via LAN?
I saw Debian 10 is not in the compatibility chart...