I already update the firmware to the latest version and I did try and still no luck.
Anyone can advise what should i do?
6: enp129s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether XX:XX:XXXX:XX:XX brd ff:ff:ff:ff:ff:ff
Good day to you.
I have 6 nodes. 5 nodes connected into a cluster and 1 node is not yet conected to cluster because I have problem with the fiber connection. 5 nodes are using Proxmox 7.1-7 and 1 node node is using 7.2-3 ( the latest version )
I did install ethtool on all 6 nodes and I...
In my case, how about if I replace the Node-01 ( Node-02 and Node-03 join the cluster using the Node-01 information ) to a new server, is it possible? And can I used the Steps that you provide? How about the Joint Information and Fingerprint?
I have questions here. Apparently I have 3 Nodes with cluster
I create cluster name at the Node-01.
Node-02 and Node-03 Join Cluster to Node-01 so the keyprint is based on the Node-01
Now I am having super problem which means I need to remove the Physical...
Yesterday my SFP+ is working.
I just formatted my proxmox server and try to use zfd ( RAID 1 ) and my networking for X710 is not working at all.
Anyone can help me? I am not familiar with the CLI.
Tried to use command systemctl restart pveproxy pvedaemon and still the error appear.
Do you any suggestion on speed up the live migration? I know RAID controller is not a good choice but I need to use it for the redundant disk.
At the moment to transfer 30GB, it takes around 6 minutes...
Yes i am sure because I tried to update using the command given and also using the GUI, and there is no update available.
and for the systemctl restart pveproxy pvedaemon , should i do at all nodes at one time?
all nodes are matching and should i reboot each nodes? looks like I need to migrates all VMs and then reboot the nodes.
However, all vms are running windows, is there any way to safe reboot without losing any opened applications in the Windows VM?
I am using proxmox in 5 nodes cluster with WHMCS modules garden, everything works perfect until this problem appear.
I believe all nodes has been updated using the GUI.
Is there any way to update manually and how to fix this error?
Thanks for the reply,
However, other than shared storage. Can I just simply migrate all VMs to node 1, then remove node-2 and node-3, reinstall latest proxmox in a new server and reuse node-2 and node 3 and reuse the IP address?
But, can you help me on what command that i need to use to remove...
Apparently I am using a new Proxmox 7.1.4
our 3 servers name :-
1) How can I re-use the same name?
2) Can i just migrate VM in Node-1 to Node-2, turn off Node-1 and install new proxmox in a new server and re-use Node-1 name nad config?
Thanks for the reply
I have questions here.
I have 3 Servers in a cluster without shared storage(CEPH). All 3 servers working very fine . Each server has 10 VM ( Windows and Linux and they works fine )
Apparently all 3 servers are very old server and I already buy 3 new server to replace 3 server without...