Search results

  1. 5.3.2 - OVS Bridge - not sending data to switch

    auto vmbr1 iface vmbr1 inet manual ovs_type OVSBridge ovs_ports eno4 vlan1066
  2. 5.3.2 - OVS Bridge - not sending data to switch

    Show VM config and show, how the switch port is configured in which eno4 is connected.
  3. 5.3.2 - OVS Bridge - not sending data to switch

    Try this: auto lo iface lo inet loopback iface eno1 inet manual iface eno2 inet manual iface eno3 inet manual allow-ovs vmbr1 allow-vmbr1 eno4 iface eno4 inet manual ovs_type OVSPort ovs_bridge vmbr1 ovs_options tag=1 vlan_mode=native-untagged #If you have untagged...
  4. Strange disk performence in Windows guest

    Small file size to test (256Mb), try to 4Gb and check.
  5. Increase maximum USB devices in vm.conf

    You set this ? And I not sure, that all 12 port may be use, because minimum one port used for virtual keyboard/mouse.
  6. Drivers - iSCSI Boot

    Download firmware-linux-free, unpack iscsi_firmware.bin to removable media, insert it into the server and try continue install.
  7. local-lvm path?

    This is not a regular file, this is a block device. (but, finally in linux all is a file :) ) In a simple way, lvm-thin storage - like a physical hard drive, /dev/pve/vm-100-disk-1 like a partition on that drive. You can create another disk for that VM with appropriate size. Boot VM from any...
  8. How I can copy VMs (5.2)?

    If you don't know, what is lvm, dd - simply create backup of needed VM and restore it to another volume.
  9. multiple nfs?

    The names of you nft storages is ext1, why you use name "nfs_ext1" ? right string is "ext1:vztmpl/ubuntu.tar.gz"
  10. [SOLVED] How to configure serial / terminal to connect to a VM guest from the PVE host?

    You must configure operation system in guest VM to use serial console. P.S. What limitations in web console block you to configure networks in guests VMs?
  11. Console characters problem

    It's not console problem. try in console: export LANG=C;dpkg-reconfigure console-setup; and choose appropriate locale and console font
  12. multiple nfs?

    First of all, you must add nfs storage on your proxmox configuration through web interface or manually in storage.cfg (if you know that you do) After that, you can access to the storages by its names: nfs_storage1:iso/somedistro.iso nfs_storage2:vztmpl/somedistro.tar.gz where nfs_storage1 and...
  13. XenServer to Proxmox

    Read this article: https://pve.proxmox.com/wiki/Migration_of_servers_to_Proxmox_VE Maybe You need "Enable IDE"
  14. [SOLVED] What is the proper way to auto mount Samba share in a container?

    You don't describe, what OS in CT used. For test, I created Proxmox CT from debian 9 template, instal cifs-utils inside CT and try mount smb share from another linux box. fstab: //linux-box/share /mnt/share cifs _netdev,username=xxx,password=yyy,iocharset=utf8 0 0 In my situation...
  15. [SOLVED] What is the proper way to auto mount Samba share in a container?

    Add '_netdev' to mount options in fstab, like this: //qnap/share /data cifs username=qnap,password=<your_pass>,_netdev,uid=1000,gid=1000 0 0
  16. ZFS over ISCSI on HP MSA 1040 SAN

    How you see that? Inside the storage - hardware raid. Raid logical disk shared as iscsi lun. Where is zfs? iscsi - is not file share. We can create numerous raid0 (each for single disk), and export each as iscsi lun, and use it on host as hdd's for zfs (but, IMHO it don't have any sence)
  17. ZFS over ISCSI on HP MSA 1040 SAN

    from iscsi you get block device, like hard disk, and you can partitioning and format it as you wish
  18. Increase maximum USB devices in vm.conf

    set for VM configuration: machine: q35 and edit: /usr/share/perl5/PVE/QemuServer.pm find and replace 5 to 9: my $MAX_USB_DEVICES = 9; restart pve-manager.service or reboot host add usb devices in VM config (sample): usb0: host=2-1.4 usb1: host=2-1.3 usb2: host=2-1.5 usb3: host=2-1.6 usb4...
  19. Installing Proxmox 5.0b2 on HP DL360 G5

    Look in /etc/default/grub and add "acpi=off" in GRUB_CMDLINE_LINUX_DEFAULT string, and run: update-grub
  20. Server Crisis, Advice welcomed!

    Hard drive crash physically or logically? What OS on VM that cannot start? type in terminal on proxmox host: vgdiaplay lvdisplay -m cat /etc/lvm/backup/* cat /etc/pve/qemu-server/104.conf ls -l /mnt/data2/backup and place output here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!