Search results

  1. Proxmox NIC and WIFI adapter passthrough to VM not accessable via NIC/LAN

    Oi Oguz, To be honest I gave up and went in a different direction to solve my issue. Turns out that the specific WIFI module that I was using doesn't have drivers for linux in general. Some people tried to generate one compiling others drivers. The result is a very poor performance and a...
  2. Why one of my nodes have a different PVE kernel version ?

    Thanks, was the reboot that was missing. I could swear that I've done it. Silly mistake....
  3. Why one of my nodes have a different PVE kernel version ?

    Hi I have 3 nodes in my lab. Two of them have Linux 5.15.35-1-pve #1 SMP PVE 5.15.35-3 as their kernel. The other one have Linux 5.15.35-1-pve #1 SMP PVE 5.15.35-2 I have checked the source list on all machines and they are the same. The two that have the same versions are NUC PCs with i7...
  4. Proxmox NIC and WIFI adapter passthrough to VM not accessable via NIC/LAN

    Hi, I need to use a WIFI adapter on one of my VMs to be able to access an specific equipment. If I connect the usb wifi adapter, although the NICs are connected as before, I cannot access the server or ping it. As soon as I remove the adapter and reboot again, everything works. I think I...
  5. unable to get (default) repository when running prune in the CLI

    Hi I'm trying to prune running proxmox-backup-client prune vm/105 --keep-hourly 25 --keep-daily 8 --keep-weekly 2 --keep-monthly 1 and this is the error I'm getting Error: unable to get (default) repository My backup per the GUI runs at 01:45 am, but I have a local job at the VE host that...
  6. Host Memory used is bigger than the sum of VMs

    Hi James, Thanks, sorry newbie. For the hosts all of them are ZFS, for the ISOs LVM (ex4). I didn't tweaked anything in ZFS. Is there a guide I can read or try to follow ? I'm using the Proxmox GUI Summary as the measure. I tried top now and I saw the same thing. I don't have cache set...
  7. Host Memory used is bigger than the sum of VMs

    Hi all I'm running Proxmox at a 24 x Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2 Sockets) with 256GB of RAM Linux versions Linux 5.11.22-3-pve #1 SMP PVE 5.11.22-6 Proxmox pve-manager/7.0-11 Right now I have 5 VMs running. 4 Ubuntu servers, 1x32GB RAM,1x16GB RAM, 1x 4GB/8GB RAM ballooning...
  8. I can see the ZFS disk but it doesn't show on zpool list

    Hi I did screw up. I remove my PBS backup disk from the server and from the ZFS disks. I can see the disk on the disks list of the GUI. If I try to wipe it, it says disk/partition '/dev/sdb' has a holder (500) I tried to import it through the command line using zpool import -a -f -d /dev/sdb...
  9. watchdog: BUG: soft lockup after installing VE 7

    I tried to install it from the scratch. Booting from an USB and it has some incompatibility with my hardware. It freezes during install. Msg Watchdog: BUG: soft lockup - CPU#2 stcuk for 22s It seems related to the linux Kernel. Any ideas ?
  10. watchdog: BUG: soft lockup after installing VE 7

    I tried to find the disk file and it only exists in /dev/pve If I use ESC to boot menu and select Virtuo SCSI it says it can't find the boot disk. I'm not sure why the system doesn't mount the disk as it should. What can I try next ?
  11. watchdog: BUG: soft lockup after installing VE 7

    Ok, I was able to boot into 5.4 with no problem. I tried the 5.11 in recovery mode and it got stuck as well. Any ideas ? Also, on 5.4 it doesn't recognizes the bootable SCSI HD.
  12. watchdog: BUG: soft lockup after installing VE 7

    It's Intel Atom E3845 AES-NI with 8gb RAM and 128GB SSD It's a crappy hardware I know. It only runs a high availability (secondary) of my OPNSense.
  13. watchdog: BUG: soft lockup after installing VE 7

    Hi I upgraded my ve from 6.4.11 to 7.0.2 last night. Looking in the boot process i can see that my PVE is LVM2 all clean Then I see errors that is the same watchdog: BUG: soft lockup - CPU#1 stuck for 22s Then like 20 seconds or so later watchdog: BUG: soft lockup - CPU#1 stuck for 23s...
  14. High IO Delay - How to find culprit ?

    Hi I have a 24 core Xeon 2620 with 2 processors and 128 Gb of run. The OS HD is a M.2 flash drive. The CPU won't go higher than 5%, the memory is at 45% usage. But I'm seeing IO delays constantly averaging 5% with peaks higher than 20%. Looking in the summary page of each VM I didn't any IO...
  15. Install QEMU Guest Agent on TrueNAS

    I don't know if you see that same thing, but on the host that runs my TrueNas VM, the memory is used much more than what I've set for TrueNas. I can see it on the summary of the host (almost all memory used on the host) but the VM is using just what it's set to use. I think it's because the...
  16. Joining a cluster with already created guests VM

    Hi I saw a video on youtube stating that we should have no guest VM when joining a cluster. I haven't found any mention of it in the documentation. Is it really the case ?
  17. OPNSense Passthrough Ethernet or WAN - Having disconnections

    Hi all I set up a OPNSense VM in a NUC machine. It has only one ethernet, so I added an USB-C dongle with another ethernet. This USB-C is passed through to the OPNsense as the WAN port. It looks ok, but I'm getting a lot of disconnections or at least the gateway is unable to ping 8.8.8.8 and...
  18. Freebsd 12.1 VM - QEMU guest agent

    Hi all I'm new at Proxmox, so bear with me. I just installed a VM based on a hardened Freebsd 12.1 (Opnsense 20.7.5). I'm looking for a way to install the QEMU guest agent. Since Opnsense blocks outside packages I have been unable to compile the agent aborche has created...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!