I have another problem now :( I can only get 6 VMS working and then it wont start the 7. or more
What do i have to configure still? Maybe the gim? If yes what exactly must be configured? @dcsapak
Thanks for the help ;)
UPDATE: I managed to get more than 6 VMs started after GIM Configuration...
reading this far i think its an issue with the sr-iov or iommu not passing correctly. Maybe you should go again into bios and set everything to legacy - especially the pcie port for the gpu. then configure it again step by step and do the compile of drivers. Also which VM Guest driver you use is...
ohhh ok then i did that intentionally right way ;) Thank you very much btw.
What about the AMD GIM Driver for Windows ? Will this driver date 2017 (Adrenalin 17.12.2) forever ?
Or is there a development ongoing somewhere else?
@dcsapak did you also try to get the new AMD "MI25 etc" to work as...
and as i didnt get the dkms process quite clearly yet, i cloned git into /usr/src/GIM-3.0 folder and enter "MxGPU-Virtualization"-folder. After that i typed in the console "./gim.sh" and got this error.
What am i doing wrong??
EDIT: I did it the DKMS-Way (see post before)
done - this is clear.
what do you mean by that? did you copy it to some place, download or how can this be understood?
i think you did then "nano /usr/src/gim-3.0/dkms.conf" and put in the above lines , saved and closed nano right? So i went through the manpages and understand what this config...
thank you very very much for the reply. It is really giving me hope as a noob.
Im struggling actually to understand how to compile. im going through all kind of tutorials to understand the basics of the compiling and the diverse differences.
So in other words i dont actually know...
is there any instruction available except this one "https://pve.proxmox.com/wiki/MxGPU_with_AMD_S7150_under_Proxmox_VE_5.x#cite_note-gim-1" ?
The mentioned link is clear for experts, but noobs do struggle quite a lot here. Is here someone who would be kind enough to make...
im very new to this and installed Proxmox VE on my Server with Intel Xeon Gold 6230 CPU, X11dpi-nt mainboard and 256 GB RAM, 2x 10G network onboard.
Somehow i am not able to get my 10g connection working with a router (fritzbox 7590). IPMI works fine. Is there any driver i need to...