Search results

  1. [SOLVED] reboots hang with "watchdog did not stop"

    @fabian what do you think about what I wrote regarding dmeventd?
  2. [SOLVED] reboots hang with "watchdog did not stop"

    I have the issue with a new v5 install, enterprise repo, all updates installed (kernel 4.10.17-20) on an Intel NUC6i7KYK. The system sits and waits after 'systemd-shutdown[1]: Sending SIGTERM to remaining processes...' for 90s until it continues with 'systemd-shutdown[1]: Sending SIGKILL to...
  3. Proxmox VE 5.0 beta1 fails to boot from ZFS-RAID1 with UEFI-only

    @fabian thanks for your quick response! Regarding your point to sync ESPs: Looking at proxinstall I wonder whether it wouldn't just be possible to run grub-install once for each ESP. See also:
  4. Proxmox VE 5.0 beta1 fails to boot from ZFS-RAID1 with UEFI-only

    Hi, I have an Intel NUC6i7KYK with the following components: - Intel Core i7-6770HQ - 2x 16GB Crucial DDR4-2133 RAM - 2x Samsung SSD 960 PRO 1TB M.2 NVMe SSD - 2x Lexar Jumpdrive S45 USB3.0 64GB USB sticks I want to try to use the USB sticks with RAID1 for the OS (and reduce writes as much as...
  5. drbdmanage license change

    tom, does that mean PVE will keep its own support/functionality for using DRBD9 (including future development and support for that PVE-internal functionality), but users have to download all 3 DRBD9 components from Linbit in the future?
  6. unable to partition hard disk

    I just created bug #1211: Is it ok like this? :)
  7. unable to partition hard disk

    Meh. I see. Is there a slot where I can insert some coins to get an updated installer ISO anytime soon (within a single number of days)? =)
  8. unable to partition hard disk

    Do you know whether there are still existing issues with 4Kn and PVE (aside from the installer issue)? It seems that the PERC H730 does not allow this kind of emulation, according to :(
  9. unable to partition hard disk

    Using gdisk I was able to create partition 1 as an LVM partition from sector 256 to sector 2929459194. What's wrong with the installer?! :(
  10. unable to partition hard disk

    I switched to tty1, pressed Ctrl+C and gained a rootshell. Then I used fdisk and gdisk to have a look at /dev/sda. You'll find the output attached in a screenshot.
  11. unable to partition hard disk

    Removing the value of the hdsize field results in its value being automatically set to 0.0. With this, the installation fails with the same error message(s) as before. Btw., starting PVE installation in debug mode results in an open shell that does not accept any input, so it's basically unusable.
  12. Is DRBD9 production ready?

    Well, the response from Linbit still leaves things open. The official and final decision by Proxmox Server Solutions GmbH is still to completely remove DRBD with all of its components?
  13. drbdmanage license change

    So, what does this *exactly* mean? Is Proxmox still allowed to distribute all 3 components from their own repository? Does Proxmox have to exclude just DRBD Manage itself from their support offerings and refer customers who need DRBD Manage support to Linbit? Why are you going to create a...
  14. unable to partition hard disk

    Well, hdsize was prefilled with 11175.0, I did not change this. I just set the Filesystem to xfs. UPDATE: I just tried it with hdsize set to 1024 -- same error.
  15. Is DRBD9 production ready?

    Any status update on DRBD9 production readiness and availability in the Proxmox Enterprise Repository?
  16. unable to partition hard disk

    Hi! I'm trying to install PVE 4.3 on a Dell PowerEdge R330 with a PERC H730 RAID controller. I created a RAID6 virtual disk (/dev/sda) which is around 11TB in size consisting of 8 Seagate Enterprise Capacity 2TB 4Kn drives (ST2000NX0263). The virtual disk, of course, also has 4K block size. I...
  17. Is DRBD9 production ready? Uhmm?!
  18. Is DRBD9 production ready?

    @tom: Yes, I know -- I should have asked differently :) Any schedule for when DRBD9 will be considered production-ready by proxmox (and/or linbit)?
  19. Is DRBD9 production ready?

    @tom: Any schedule for when DRBD9 will make it into the subscription repo?


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!