sometimes I get the following message:
restore vma archive: zcat /mnt/pve/crbBackuper/dump/vzdump-qemu-101-2015_05_04-13_22_56.vma.gz|vma extract -v -r /var/tmp/vzdumptmp204368.fifo - /var/tmp/vzdumptmp204368
TASK ERROR: command 'zcat...
i have proxmox 3.1, and 6 vm - they all work, but were stopped
one image is very large, backup with him -error (in this image 255GB, freespace about 2GB) and free space on proxmox disk 150gb from 1Tb
try to download the image& config file to another proxmox 3.4, and restore but have error (file...
How do I enable the firewall to only one virtual machine ?(guest OS Windows, network device:net0(vitrio,bridge=vmbr0))
I want to give access to RDP only certain addresses (example get access from 10.92.31.106, deny from other)
please step by step .
I want to give the incoming access on RDP only from specific addresses (ip's) to vm200 (win2008+terminalserver).
However, a long list of addresses , and write in the "source" uncomfortable. How do I create a group ?
(proxmox3.3, try from webgui)
Suddenly dependent cluster (firstProxmox + second Proxmox).
secondProxmox broken (motherboard problem), and on firstProxmox not Login To webGUI (only via "ssh service pvedaemon restart")
made as follows:
#pvecm e 1
#pvecm delnode secondProxmox
Power off the virtual machine to firstProxmox...
When installed proxmox, set ip 192.168.0.25
create vm's, AND change ip of proxmox (via gui)
stop vm's, reboot proxmox
after reboot web-gui on new ip, but on screen (welcome to proxmox virtual enviroment bla-bla-bla) - old ip
pve-manager: 3.1-21 (running version: 3.1-21/93bf03d4)
situation with KVM VM (Windows 2003 R2 64 guests).
I can't install virtio driver (virtio-win-0.1 74.iso from Folder XP (32/64) as in http://pve.proxmox.com/wiki/Windows_VirtIO_Drivers#Choose_the_right_driver) get error 39,
BUT if install driver from NetKVM.iso (find in internet)...
sorry for bad english
i have norton ghost's image (os:winserver 2008 r2 std x64)
restoring this image in proxmox 3.1 (hdd:ide0 80gb, memory:3gb, cpu:4cores, lan:rtl8139)
start loading in normal mode - BSOD - error 7b or black screen
start loading in safe mode - stopped running on classpnp.sys...
sorry for bad english....
i have Proxmox 2.2-24 (no raid) and nfs-storage (openfiler)
Proxmox have 2 virtual systems:
On Friday I run backup manually (vm-100) through the [backup now]->[snapshot-lzo]. Archive was made successfully for 1 hour...
I have the a little problem.
Proxmox has this network configuration:
vmbr0 eth0 192.168.1.10 255.255.255.0
vmbr1 eth1 10.92.x.x. 255.255.255.224 10.92.x.x
but if change 192.168.1.10 to 192.168.0.5, save and restart Proxmox,
web-gui will at 192.168.1.10:8006 and not...
i have 2 network card - lan (192.168.0.0/24) wan (10.92.x.x)
how to give access to web-interface only from the local network? from 192.168.0.0/24
from apache config
sorry for bad english
Order Allow, Deny
Deny from All
Allow from 192.168.0.0/24...
There are 2 network interfaces (eth0-lan eth1-internet)
I want to give access SSH only through eth0.
have any questions
1. best done through iptables or there are other better solutions?
2. if cut, ssh (port 22) on eth1, lost access to the vm (via ssh) are connected through vmbr1? (need...