Search results

  1. KVM process allways on 100%

    Re: KVM process allways on 100% (added info) flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good extd_apicid pni lahf_lm cmp_legacy AMD-V which stands for AMD Virtualization...
  2. Windows crashes under heavy I/O load?

    ok, noted. shall set cache=no for all my vms. Thank you for your advise! =)
  3. Windows crashes under heavy I/O load?

    name: testw2k8 ide2: none,media=cdrom vlan0: rtl8139=AE:87:67:C3:DF:27 ostype: w2k8 bootdisk: virtio0 virtio0: local:103/vm-103-disk-1.raw memory: 2048 sockets: 1 boot: dc freeze: 0 cpuunits: 1000 acpi: 1 kvm: 1 onboot: 0 cores: 2 args: -cpu host cpu: host net0...
  4. Windows crashes under heavy I/O load?

    Hi Tom, Thank you for your prompt reply, I guess I had figured out the problem. The blue screen of death dissapears if I set cache: no-cache ! Earlier I was using "Write-Back" cache, thinking I could use this since my raid card supports write-back with bbu. After setting to no-cache, the...
  5. Windows crashes under heavy I/O load?

    Hello, I have a test system on Proxmox 2.0 Beta. After moving a windows 2008R2 vm from promox 1.9 to 2.0 successfully. I notice the windows startup prompted for driver for the new virtio io controller, the old virtio io driver is no longer accepted, therefore I downloaded the latest...
  6. Roadmap for Proxmox VE 2.0

    Cool... downloading now!!
  7. grub boot problem after raid controller replacement

    Strangely the raid BIOS works perfectly showing me I had foreign array configurations and allow me to import them. It is able to read and configure all the hard disk too. Ok, the issue is definately not due to kernel and drivers, I am suspecting it may be far more complicated hardware...
  8. grub boot problem after raid controller replacement

    Hi Tom, While on the old Megaraid 8344ELP, I updated all proxmox modules and kernel to 2.6.32-6-pve server:~# modinfo megaraid_sas filename: /lib/modules/2.6.32-6-pve/kernel/drivers/scsi/megaraid/megaraid_sas.ko description: LSI MegaRAID SAS Driver author...
  9. grub boot problem after raid controller replacement

    Ok. i just tried swaping to the new 6gbps megaraid 9240-8i on the disk array with proxmox-ve-2.6.18 installed. Same problem as the other proxmox kernel version, boot up stops at: GNU GRUB version 0.97 (0K lower / 0K upper memory) [ Minimal BASH-like line editing is supported. For the first...
  10. grub boot problem after raid controller replacement

    Hi Tom, I just tried downgrading to proxmox-ve-2.6.18, however the system went offline and could not connect to network after installing proxmox-ve-2.6.18 and reboot. Could be lack of network driver support for my system? I then quickly switched back to proxmox-ve-2.6.32. Perhaps I should...
  11. grub boot problem after raid controller replacement

    hmmm.... ubuntu 10.04.2 comes with megaraid driver 4.01 too and it did not work as well. however centOS 5.4 comes with megaraid driver 4.08-RH2 and it works perfectly fine. I belive the issue is with driver 4.01, i can't wait to test your upcoming 2.6.32-6-pve!! :D
  12. grub boot problem after raid controller replacement

    sorry for the confusion, the kernel I am using is: pve-kernel-2.6.32-5-pve: which is kernel 2.6.32-36 ? That should have the driver support, but didn't work out.
  13. grub boot problem after raid controller replacement

    Ok. after much searching around, it seems that it was the driver for megaraid 9240 9260 9280 8704 8708 8880 8888 not supported until kernel 2.6.32-29 (http://lists.debian.org/debian-kernel/2010/12/msg00246.html) Proxmox current latest kernel 2.6.32-5, I have tried upgrading kernel to 2.6.35-1...
  14. grub boot problem after raid controller replacement

    My server was originally running proxmox 1.8 happily on a megaraid 8344ELP, however after installing new megaraid 9240-8i (due to 6gbps support) and imported the raid array+configurations, proxmox boot up now shows: GNU GRUB version 0.97 (0K lower / 0K upper memory) [ Minimal BASH-like line...
  15. Windows OEM and SMBIOS

    I would like to know how this can be done as well. Passing the args param to kvm is not sufficient, you also need to extract the actual HP SLIC table and recompile SeaBIOS There were serveral post about the SLIC table, but I could not get it working too thou...
  16. Win7 Virtio NIC ' media unoperational' after ~12-24hrs uptime

    I have the exact same issue with a KVM win 2008 R2 64bit guest using Virtio nic. I am using the latest Fedora drivers. Using any other nic does not have this problem. pveversion -v pve-manager: 1.8-19 (pve-manager/1.8/6379) running kernel: 2.6.35-2-pve proxmox-ve-2.6.35: 1.8-13...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!