Search results

  1. Hannes Laimer

    DHCP on pfSense VM not handing out addresses past the host

    Yes, you should still need it. I just stumbled across [1], since DHCP is broadcast-based, this might be worth a try. [1] https://wiki.openvz.org/Bridge_doesn%27t_forward_packets
  2. Hannes Laimer

    DHCP on pfSense VM not handing out addresses past the host

    You're right ifconfig not ip a. So, pfsense is handing out IPs only on vtnet0. On WAN you usually get an IP and not hand IPs out. You need another interface that connects to your physical network, not just the bridge the other VMs use. That interface would then hand out IPs to your physical network.
  3. Hannes Laimer

    Cant ssh to VM after creation with terraform and proxmox

    Hey, what do you mean you don't have access to the GUI of the VM? For the SSH, can you connect with ssh -o "StrictHostKeyChecking=no" ...? Can you ping the VM?
  4. Hannes Laimer

    Durchgereichte Laufwerke vom Backup ausschließen

    Hey, ohne den Hacken bei 'Backup' wird es bei Backups nicht inkludiert.
  5. Hannes Laimer

    DHCP on pfSense VM not handing out addresses past the host

    Could you post the output of ip a on the pfsense VM?
  6. Hannes Laimer

    DHCP on pfSense VM not handing out addresses past the host

    Hey, did you set up the DHCP server for the correct interface[1]? [1] https://docs.netgate.com/pfsense/en/latest/services/dhcp/ipv4.html#choosing-an-interface
  7. Hannes Laimer

    Load to high every Night at 2:00

    Does the spike happen if you start the backup manually for the CT that would usually be backup up at 2:00?
  8. Hannes Laimer

    Load to high every Night at 2:00

    Does the spike also happen if no backups are done at 02:00? Other than the backup nothing happened according to the logs, so it seems reasonable to assume that the backup is the reason. For the EXT4-fs (dm-11): write access unavailable, skipping orphan cleanup take a look at[1], this is normal...
  9. Hannes Laimer

    ERROR: Failed to run vncproxy by proxmox

    When you click the line of the error message, what does it say?
  10. Hannes Laimer

    ERROR: Failed to run vncproxy by proxmox

    Hey, this error message usually shows if you're trying to connect to a VM that is not running, so this is probably the result of the VM crashing rather than the cause. Could you check the logs for the time when that happened, journalctl --since "2022-01-<DAY> 00:00:00" --until "2022-01-<DAY>...
  11. Hannes Laimer

    Load to high every Night at 2:00

    Hey, could you check the logs during that time, something like journalctl --since "2022-01-<DAY> 01:59:50" --until "2022-01-<DAY> 02:04:00" should work. Also, a bit of a wild guess, but do you have a static IP? If not, you're ISP might assign you a new IP at 2 AM, and if your containers rely on...
  12. Hannes Laimer

    400 Parameter verification failed.

    The error means that one of the parameters you're setting is not allowed/formatted properly, but since it is not clear which parameters are set by proxmox-api-go, enabling debugging output as described in [1] might be helpful. Could you post the output when you run it with dbg enabled? [1]...
  13. Hannes Laimer

    400 Parameter verification failed.

    Hey, what is the exact error message, when does it show up and what are you trying to accomplish?
  14. Hannes Laimer

    Add node to a cluster from another network

    Hey, the nodes of the cluster have to be able to reach each other, so every node has to be able to connect to every other node within the cluster. You could set up a small VPN server (e.g. [1][2]) on one of the nodes and connect the others to it. Or (if possible) connect those two networks...
  15. Hannes Laimer

    Poor desktop performance

    Hey, how do you connect to the VM? And what type of network are you using? It is very possible that the problem is not the VMs but rather the network over which you connect to them.
  16. Hannes Laimer

    [SOLVED] Running a VM on a sshfs fills disk locally instead

    Hey, make sure when creating the VM you select the correct storage.
  17. Hannes Laimer

    Windows 2003 x86, network duplex problem 2nd network card

    This seems to be a windows-related problem since it works with a newer version of windows. Make sure you have the correct drivers installed, other than that I'd probably recommend maybe updating to a newer windows version.
  18. Hannes Laimer

    Windows 2003 x86, network duplex problem 2nd network card

    Hey, with "VE container" you mean a virtual machine, right? Just to make sure I understood correctly, you have PVE 7.1 setup and you're trying to pass a PCIe NIC through to the Windows 2003 VM. Does the NIC you're trying to use work with other VMs, maybe with a newer version of Windows or...
  19. Hannes Laimer

    NFS option nconnect

    Hey, could you post the output of pveversion -v? After unmounting make sure it is actually unmounted mount | grep nfs.
  20. Hannes Laimer

    proxmox backup client for ubuntu 18.04

    Hey, the needed version of libfuse seems to only be available in newer Ubuntu versions [1]. I'm not sure if it is possible to get the newer version installed on Ubuntu. [1] https://packages.ubuntu.com/search?keywords=libfuse3-3

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!