Search results

  1. Bond Problem

    Unfortunately, I still don't quite understand it. e.g. I have two client PCs, one transmits data to the Truenas, the other transmits data to the Windows VM. As soon as both clients start copying, the speed is halved to 50 Mbit / s. Is that correct? I changed the config to layer3+4.
  2. Bond Problem

    Thx for your answers.
  3. Bond Problem

    Hello, I have configured a bond. auto lo iface lo inet loopback auto enp38s0 iface enp38s0 inet manual auto enp39s0 iface enp39s0 inet manual iface enp42s0f3u5u3c2 inet manual auto enp45s0f0 iface enp45s0f0 inet manual auto enp45s0f1 iface enp45s0f1 inet manual iface enp45s0f2 inet...
  4. which AMD cpu is better for proxmox

    thx to all. i think i buy the 3700x. its only a homelab mit 4 VM and 3 lxc's
  5. AMD-Vi: Unable to read/write to IOMMU perf counter

    @Ramalama do you compile the kernel yourself? on the page is the 5.11.7 https://github.com/fabianishere/pve-edge-kernel/releases unfortunately I can't find it. have you tested it yet?
  6. AMD-Vi: Unable to read/write to IOMMU perf counter

    @Ramalama i no xD. do you think the new BIOS works with the 5.11 kernel? one question ... what do I actually have to install? only the pve-edge-kernel-5.11.6-1_5.11.6-1+zen21_amd64.deb for my 4650G? Do I have to install the other things linux-tools-5.11_5.11.6-1_amd64.deb...
  7. which AMD cpu is better for proxmox

    Hello people, as the title suggests, I need your help for a moment. I stand between the two CPUs for my Homelab. Which CPU do you think is better (performance vs efficiency)? 3700x (8 cores) 5600x (6 cores)
  8. AMD-Vi: Unable to read/write to IOMMU perf counter

    @Ramalama yes, ist was only a BIOS downgrade to 1.00 :). But i think the mainboard is trash. I can‘t use the onboard 210 nics. If i do a bond my Speed Drops down to 11 MB/s. If i try to passthrough the 210 nics to pfsense the Proxmox crash. If i do the same with my i350-t2 pci Card everthing...
  9. AMD-Vi: Unable to read/write to IOMMU perf counter

    Hello everybody, so i have installed pve-edge. did not help. Only the downgrade to the first BIOS version. However, the groupings still look bad, don't they? root@pve:~# dmesg |grep -e DMAR -e IOMMU -e AMD-Vi [ 0.731449] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter...
  10. AMD-Vi: Unable to read/write to IOMMU perf counter

    acs_override = downstream did not bring anything either. Bios update is already done. That doesn't help either. Do you think it makes sense to set up a new Proxmox? However, I only did that yesterday. Should I try ZFS instead of ex4? Do you think that would help?
  11. AMD-Vi: Unable to read/write to IOMMU perf counter

    root@pve2021:/usr/bin# for d in /sys/kernel/iommu_groups/*/devices/*; do n=${d#*/iommu_groups/*}; n=${n%%/*}; printf 'IOMMU group %s ' "$n"; lspci -nns "${d##*/}"; done IOMMU group 0 00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632] IOMMU...
  12. AMD-Vi: Unable to read/write to IOMMU perf counter

    I would be careful with such statements! I've been googling all day. Still no solution found. I also tried your miracle tool with a great result! root@pve2021:/usr/bin# cat /etc/systemd/system/vfio-helper.service [Unit] Description=Script to bind Devices on boot Before=pve-guests.service...
  13. AMD-Vi: Unable to read/write to IOMMU perf counter

    What is the problem then? I can't even get through a USB hard drive. That wasn't a problem with my old XEON processor. I also have a 350-t2 and an i211, i.e. I could pass one of the two cards through. If I do that, however, the whole system freezes.
  14. AMD-Vi: Unable to read/write to IOMMU perf counter

    Thanks for your replay. The message is still the same. I chanced the Code und update-grup + reboot If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration'...
  15. AMD-Vi: Unable to read/write to IOMMU perf counter

    Hi Guys, helpless seeks help! I want to hand over my NIC to a VM. Unfortunately that doesn't work. I think it's because of the IOMMU bug. Mainboard: X570D4U CPU: Ryzen Pro 4650G Proxmox: 6.3 yesterday clean install Bios: SVM: Yes Iommu: Auto / Enable All settings have been tested, but I...
  16. lxc mount point problem

    Hello Guys, for years my lxc container has accessed a mountpoint (/data/storage) of the host. Now it does not work anymore. root@pve:~# zfs list NAME USED AVAIL REFER MOUNTPOINT data 922G 1.73T 104K /data data/image...
  17. Help with Proxmox installation clone

    the cloning does not work. all vms and lxc are on a different hard disk. proxmox is on its own plate. if I reinstall proxmox are all vms still untouched on the other pöatte. can they be mounted again? without having to re-import backups?
  18. Help with Proxmox installation clone

    How can I do that? I've gparted the LVM thin partition downsized when I want Clonezilla clones then I get the error message that the old HDD is larger than the SSD and the process is aborted.
  19. Help with Proxmox installation clone

    I tried. Unfortunately without success. My problem is that the new hard disk is smaller. How can I solve this problem? Is there a way to backup the configuration and just re-install it?

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!