i have an issue with a dell r320 server. it works fine with proxmox, but as soon as i have more than 16gb of ram installed the system powers off during linux booting. doing a system check all memory checks are passed successfully.
this happens during booting proxmox installation-iso as well...
I have installed proxmox on a dell r320 with zfs raid-1.
this seems fine, and i am able to remove a drive and everything works fine. doing further tests it doesn't wo work to simply insert a blank drive and attach it to the zfs pool - boot partition is not synced in this case.
i updated proxmox from 5 to 6 last week and after some issues it works now very well.
unfortunately a small issue is left: the file /usr/local/lib/libz.so.1 is an old version (this caused some troubles during installation already). when i remove that file, everything works smooth, but after...
i upgraded my proxmox installation. due to some local issues the installation was interrupted and i had to continue later on by dpkg --configure -a and apt fullupgrade.
however, everything seems up to date, but proxmox is not working.
pveproxy is running, but i am not able to reach the gui...
hab seit ein paar tagen das problem, das ich kein upgrade mehr machen kann:
user@pveserver:~# sudo apt upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet...
in my home-setup i was trying to set up pfSense in a virtual machine with two virtual network interfaces. on the proxmox host itself is only one network available.
all in all the routing is working, local network is working and wan as well, everything is routed well.
but: the performance is...
Hi,I want to have a fileserver as VM running under proxmox. Currently I have two options to get access an internal harddisk from different VMs / Proxmox:1. passthrough the hdd to my NAS-VM and have an NFS- or CIFS-share to access the disk from proxmox / other VMs2. like 1st, but have the disk...
Hi, I want to use a harddisk in several VMs (or in one VM and for proxmox itself). In general it is possible, but I get data inconsistencies. Is it possible to let the host do all I/O operations? or is there another way to tell a guest system to have a "physical" disc but writing data, that is...
can someone explain, why a harddisk, which is relevant neither for Proxmox (located on another hdd) nor for the VM (which is located on the same hdd as proxmox), wakes up, when the VM is stopped, started or a new one created?
1. Proxmox is installed on /dev/sda, where also the...
I have suddenly a problem with my LVM.
Everything worked fine, since I wanted to install a new VM. I wasn't able to choose my LVM as destination anymore - there was no capacity available.
At least I tried to add my LVM from scratch.
Now I receive the message "vgname: invalid format - lvm...
I have the following issue:
My Proxmox (Linux server 2.6.32-20-pve) is running from usb-sticks (will be moved to an ssd soon) with 2 hdds in it. Both hdds are not used right now. The first one is going to sleep fine (Toshiba 3TB). The other one (seagate 1.5TB) is not going to sleep. If I...
i am just building up my private server with proxmox.
My goal is to have proxmox installed on my "central" filesystem (it is a usb-stick, already running) and for each vm i want another usb-stick with its own filesystem. so every vm will be independent.
as far as i see i have to do this in...
I have some problems configuring my VMs to access them from my internal LAN.
my network: 192.168.9.0
my router and dhcp-server: 192.168.9.2
my server hosting VMs (proxmox): 192.168.9.1
in proxmox i have configured eth0 with 192.168.9.1, gateway 192.168.9.2, vmbr0 with ip 192.168.9.20. both...