We use x2go and chrome remote desktop for VDI on the virtual machines that are on proxmox.
We recently started using spice to access webcam through weaker computers (dualcore processors) that don't support good quality video conferencing.
Everything is working perfectly (audio and...
We will get AMD Ryzen 7 (2700X) and 9 (3900X). I would like to know if the lack of integrated graphics affects anything in vm. The use of VDI spice/proxmox, x2go, chrome remote desktop will normally occur, correct?
I'm enabling lvm-thin, but I had trouble following the proxmox documentation (https://pve.proxmox.com/pve-docs/pve-admin-guide.html#chapter_lvm and https: //pve.proxmox. com / wiki / Storage: _LVM_Thin)
I did the following (first try):
# fdisk / dev / sdb >> to format in LVM and have two...
I have 3 node of proxmox and currently each node has 1 vm. Everything is working perfectly, but I'm not understanding what's happening with "Dynamic Memory Management (DMM)".
The node01 (figure01) is not using the DMM because it only leaves the RAM minimum enabled
The node02 (figure02) is...
I'm having trouble on my network. I believe that the configuration in proxmox is correct, but the real machine (proxmox 5) does not connect in the internet. I've tried something and it did not work, any suggestions?
/etc/network/interfaces looks like this:
We move a virtual disk from one store zfs (hd sata) to another (ssd sata). When we move, we do not discard the hd sata virtual disk. We had a problem with ssd sata, but we were unable to add the virtual disk again this hd sata as "unused". Any tips/instruction how to proceed?
Hello, we have a cluster of proxmox 5 with four nodes in unicast (IPv4) and the syslog of the four nodes is appreciating the following message:
... corosync: alert [TOTEM ] Invalid packet data
... corosync: [TOTEM ] Digest does not match
... corosync: [TOTEM ] Received message...
We have installed ZFS enabled in proxmox 5. We left image and container in storage "ZFS" and backup, iso and template in storage "Directory >> ZFS", ok?
these two storage units share the same space, but monitoring the use of this space is not centralized, correct?
In the two links below it is shown how to enable installation and boot via NVMe PCIe:
Is it possible to do something similar using the proxmox live cd through advanced...
I reduced a partition of a virtual machine by the liveCD using Gparted -540GB (apparently OK)
How do I reduce these -540GB on proxmox? Just edit the "/etc/pve/qem-server/10X.conf"?
I tried using the command below, but it did not work:
When I delete HD data from the virtual machine, the raw/qcow2 file does not reduce, correct? Is there any way you can do this?
(1) I created the virtual machine and put a HD 500 GB, the qcow2 file appeared with 50 MB - OK
(2) then I put 100 GB (data) and the qcow2 file...
I read that there is a recommendation manually install debian install and pve on top of it, if you want to clone the Proxmox (https://forum.proxmox.com/threads/reinstall-proxmox-without-format.26221/#post-131672).
But the clonezilla or dd command could not be used for this in a direct...