Search results

  1. ACPI\QEMU0002

    Hi wolfgang - to show hidden device in Windows: Open a command prompt with Administrative privileges At the command prompt, type the following lines, pressing ENTER after each line set devmgr_show_nonpresent_devices=1 cd\%SystemRoot%\System32 devmgmt.msc In Device Manager go to View > Show...
  2. ACPI\QEMU0002

    agent: 1 bootdisk: virtio0 cores: 1 ide0: none,media=cdrom memory: 2048 name: MasDtPm net0: virtio=16:04:01:F7:C4:5C,bridge=vmbr0 numa: 0 ostype: wxp scsihw: lsi smbios1: uuid=e92a11da-c7ee-41cf-ac14-f098380e2dc3 sockets: 1 virtio0: TGItra:vm-102-disk-1,size=70G virtio1...
  3. ACPI\QEMU0002

    No problem VM BIOS setting is Default (SeaBIOS)
  4. ACPI\QEMU0002

    Hi Wolfgang I believe we are using BIOS Legacy mode on the Proxmox host. # [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" Legacy boot on HDD
  5. ACPI\QEMU0002

    I've noticed the same this with Windows 2008 R2 x64 and Windows 2003 x32 virtual machines I have Proxmox version 4.4 and Virtio drivers version 126 stable. Would be nice to find proper drivers for ACPI\QEMU0002
  6. How to let users view and restore backups

    I noticed that this is different for version 4 now. Here is what I done in version 4: Go to Datacenter | Permissions | Authentication Create Name: UsersBackup Comment: Allow users to backup to local disk Go to Datacenter | Permissions | Users Edit the User(s) requiring permission by including...
  7. LVM Groups with Network Backing. Do we need to install/configure CLVM?

    Hi We are setting up a cluster of Proxmox ver 4.2 hosts using shared LVM Groups with Network Backing via 10GB ISCSI to a Dell MD3800i SAN. Just looking at the following post for Proxmox ver 1 it mentions that we need to consider using CLVM...
  8. How to let users view and restore backups

    Thanks Jeff I saw that document before but it did not make sense for me. Nevertheless, I did finally work it out. Not sure if this is the best way to do it but it works for me. For dummies like me here is what I did via the web GUI (ver 3.2) for VM users who also need to backup VMs: Datacenter |...
  9. How to let users view and restore backups

    Hi Dietmar Can you please detail how to grant a user 'Datastore.AllocateSpace' permission on the (backup) storage?
  10. maxView Storage Manager v1.04.20859 for 64-bit Linux for 6xxx RAID Card

    Great to hear that you had success. Thanks for letting us know.
  11. How to move subscription key from old to new servers

    I just found out that the process has changed after logging a support ticket. You can do it yourself now. Here is the response: We enabled re-issuing subscription keys on the client portal, so please just go to: 1. Click on "Detail" 2...
  12. maxView Storage Manager v1.04.20859 for 64-bit Linux for 6xxx RAID Card

    My solution was I had to first amend my Proxmox package repository file as the following command was erroring apt-get update && apt-get install unzip libpam-cracklib then i found the...
  13. cannot login into maxview storage manager

    Thanks Rawman. Worked for me with Proxmox 3.4 and Adaptec 6405 card with Maxview 1.08-21375 Minor amendment to Rawman instructions: "edit the /etc/pam.d/wbem change the path part of the modules from /lib/security/ to /lib/x86_64-linux-gnu/security/"
  14. maxView Storage Manager v1.04.20859 for 64-bit Linux for 6xxx RAID Card

    I'm getting same error message connecting from Google Chrome for maxview v1.08.21375 for and Adaptec 6405 card. Did anyone find a solution for this?
  15. share usb harddrive to kvm

    I found a workaround and note that I am running Proxmox VE 3.2 Amended vm config file to virtio1: /dev/sdc Could then 'Optimize for quick removal'. After safely ejecting drive in Windows, the Windows VM would continue to run. However, if VM is shutdown there is a proxmox error on VM start up if...
  16. share usb harddrive to kvm

    Hi Udo I have a USB 3.0 device connected to the Proxmox host I added ide1: /dev/sdc to the VM config file as suggested and could see the drive in Windows 2003. I even managed to get USB 3.0 speeds out of it which which is great. However, as it is a USB drive I'd like to use it in Windows as a...
  17. Intel Raid Web Console Installation

    Does anyone know how to install Intel RAID Web 2 Console on a Proxmox server? I just want to be able to remotely view the status of the Proxmox RAID from a Windows client. The readme that comes with the Intel Linux download does not make any sense. I think that it is only supported for Red Hat...
  18. How Can I move ProxMox Virtual Machines from a server to another without cluster?

    Yes, Here is what i did using a USB Drive and I have written it up for dummies like me ; ): Connect the USB drive to the Source Proxmox server. Go to source proxmox console Determine which drive is the USB drive (in my case it was /dev/sdc): fdisk -l prepare disk for mounting: cfdisk...
  19. Use 2nd (Second) drive as backup drive

    I used udo’s Option 1 and did the following and it worked. For Dummies like me I’ve put it in as simple english as possible. #Identify local disk to be used as backup drive via proxmox ssh console fdisk -l # In our case dev/sdc was intended for the local backup drive. # format and prepare disk...


The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!