C236 & PCIe

Altinea

Active Member
Jan 12, 2018
33
7
28
41
Hello,
We're trying to setup a Supermicro X11SSW-F with X520-DA2 10Gbps NIC on a RSC-W-68-P riser card.

But the card isn't detected, not even shown on lspci output.

The motherboard is based on a C236 chipset but it doesn't seems really well detected. lspci shows :

00:00.0 Host bridge: Intel Corporation Device 5918 (rev 05)
Subsystem: Super Micro Computer Inc Device 089b
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: ie31200_edac
Kernel modules: ie31200_edac


Kernel version is (at least) 4.15.18-10-pve, probably newer (I don't have full time access on the server).

C236 isn't really what I whould name a 'recent' chipset, dunno why it isn't perfectly detected.

Any clue ?

Thanks !
Julien
 
Sadly, the server is already installed in a datacenter. We could try with a stock Ubuntu kernel perhaps. Never tried this.
And of course, we don't have any IPMI access ...

Thanks for your answer, will try this tomorrow.
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!