Hi Matthias,
thanks for your answer. I checked ping and SSH connection but after more debugging for the service pve-cluster, i saw that it was not able to find his own IP address, because the hostname in the hosts file has been added to 127.0.0.1 and to the ip address. The error was...
Hi all,
today i restarted one node of our proxmox cluster with pve 7.1-10. This node now has a empty /etc/pve directory. I dont see any reason for that. So my questions are:
1. Is it possible to debug / find the issue for that?
2. There is / was a VM with ID 100 with local storage on this...
I meant generally in comparison 0.9 to 1.2
We would like to run a Ceph monitor on the Proxmox system. As far as we know, ext4 is best suited for this. ZFS also needs more RAM in comparison. The important thing here is that the Ceph monitor is also on the Proxmox partition. Do you have a good...
thanks @LnxBil for your answer.
yes, we use /dev/nvme0n1p1 as boot device. For the Raid 1 setup, according to the output of mdadm, would metadata 0.9 be a big disadvantage for us in comparison?
ext4 is required for our use case, unfortunately it is not possible to create a raid under ext4...
Good day everybody,
we would like to subsequently set up a software raid 1 on our Proxmox system with mdadm.
Proxmox itself is currently installed on an NVMe with ext4, which is now to be mirrored on another NVMe.
However, the following error occurs.
"Floating point exception"
root@pr-001:~#...
Hi all,
we've setup a new proxmox cluster today and the total available storage count is wrong. We use local storage on all three nodes, one local-zfs with 200 GB each, and another disk with 1,4 TB. This would be 1,6 TB per node (total with three nodes 4,8 TB).
The view shows only 2,2 TB. Any...
Hallo zusammen,
ist es möglich, aus ein paar Proxmox Single Node Servern mit aktuell bestehenden VMs ein Cluster aus mehreren Proxmox Servern zu bauen? Ich habe darauf geachtet, dass keine VM ID doppelt vorhanden ist.
Habe aber dennoch gelesen, dass dies wohl nicht so einfach möglich ist...
Hi all,
i'm new to ZFS and i've just noticed that it isn't possible to navigate directly to the VM storage folder (where the vm disks are saved). If you use local storage (ext4 or nfs) this is possible. Is there any reason for this?
I've also noticed that new images can be only created as raw...
Hi all,
short question. Am i right that if i have no subscription for Proxmox and just use "deb https://enterprise.proxmox.com/debian/pve stretch pve-enterprise" (which is the default on Proxmox iso) i will never get updates for Proxmox (qemu and so on)?
If i want to get them, i have to change...
Hey scaa,
we've the same problem here.
Maybe i have some interesting facts for you:
Our Server-Hardware:
X10DRI
2x Intel® Xeon® Processor E5-2620 v3
64GB DDR4 RAM
Storage:
1x RAID-1 with 2x Intel SSDs
1x RAID-1 with 2x Seagate 3TB SAS
With Storage Controller Avago MegaRAID 9361-4i...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.