Recent content by rordonez

  1. R

    [SOLVED] reboots hang with "watchdog did not stop"

    Thanks for sharing, I forgot to add the following lines to /etc/apt/sources.list # PVE pve-no-subscription repository provided by proxmox.com, # NOT recommended for production use deb http://download.proxmox.com/debian/pve stretch pve-no-subscription afterwards worked fine on hp server with...
  2. R

    [SOLVED] reboots hang with "watchdog did not stop"

    I found an ugly workaround I was able to diagnose a bit further, The test server has only 1 kvm windows 2008 server vm. If you issue an: qm stop vmid then reboot works fine!, However if I issue a qm shutdown vmid The server hangs and cannot reboot/shutdown Looks like the shutdown sends...
  3. R

    [SOLVED] reboots hang with "watchdog did not stop"

    I think Im running the latest on the no-subscription REPO(4.15.17-1-pve). could you share your kernel version? proxmox-ve: 5.2-2 (running kernel: 4.15.17-1-pve) pve-manager: 5.2-1 (running version: 5.2-1/0fcd7879) pve-kernel-4.15: 5.2-1 pve-kernel-4.15.17-1-pve: 4.15.17-9 corosync: 2.4.2-pve5...
  4. R

    [SOLVED] reboots hang with "watchdog did not stop"

    Provisioned a Twin server like this one hp-proliant dl160 g8 and the problem did not went away, It started after running Windows KVM Virtual Machines on the server with windows 2008 server r2 or windows 2016 server So this solution is not the correct one, Changed the setting for...
  5. R

    [SOLVED] reboots hang with "watchdog did not stop"

    Wanted to share our findings on this issue. In our case a HP DL160 G8 - With a p420 Raid Card. The last message displayed was watchdog did not stop It was the shutdown of the raidcard that caused the hang, We had to: 1 update the p420 firmware to 8.x 2 destroy the array that was on the disks...
  6. R

    Meltdown and Spectre Linux Kernel fixes

    This is a question : Is this the correct way to a update a non subscription server to protect against the Vulns: 1)Enable test repo adding the following line to /etc/apt/source.list deb http://download.proxmox.com/debian/pve stretch pvetest 2)Issue the following commands on the console: apt...
  7. R

    Adding second hard vgdisplay cannot show volume group

    Re: Trying to restore pve group QUESTION? Hi I can now see the light, I found at this directory :/etc/lvm/archive Files that seem to be backups of the lvm configurations before any changes were made, There is also a /etc/lvm/backup where i can see previous configurations Now i have to...
  8. R

    Adding second hard vgdisplay cannot show volume group

    Trying to restore pve group QUESTION? I found out that the main disk exists but is marked as NEW Physical volume If i recreate the pve group and add the volume to it ---WHAT WILL happen with the /dev/sda2 info is it safe to do so? lorena:~# pvdisplay -v /dev/sda2 Using physical...
  9. R

    Adding second hard vgdisplay cannot show volume group

    HI, I found the following tools to try to fix this issue vgcfgbackup vgck vgdisplay vgimport vgmknodes vgrename vgsplit vgcfgrestore vgconvert vgexport vgimportclone vgreduce vgs vgchange vgcreate vgextend vgmerge vgremove vgscan is it safe to run...
  10. R

    Adding second hard vgdisplay cannot show volume group

    HI thanks for following Ive been reading the forum searching for a similar issue, I think the device with uuid Mpzpul- was not correctly destroyed or removed(i had a mixed concept trying to format the device) --it was somehow added incorrectly to the pve group (first post) and corrupted the...
  11. R

    Adding second hard vgdisplay cannot show volume group

    Thanks for you prompt response, I was able to add a new group (by reading the wiki) and added the secondary hard drive storage as another lvm group, However when i go to the UI and clic on New lvm group I get an ugly perl error +++++++ [9069]ERR: 24: Error in Perl code: command '/sbin/vgs...
  12. R

    Adding second hard vgdisplay cannot show volume group

    Hi, I recently added a second sata (first is also sata) hard drive to our proxmox running kernel 2.6.18-2-pve #1 SMP. version: pve-manager/1.5/4674 Created new partitions on sdb and tried to add lvm group , however vgdisplay now shows a problem: vgdisplay Couldn't find device with uuid...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!