Recent content by maxm

  1. M

    Separates Netzwerk für Clusterkommunikation

    Jeep, hatte unmittelbar auf allen 3 Knoten die /etc/hosts und die /etc/network/interfaces entsprechend angepasst und danach erst die "alte" /etc/pve/corosync.conf mit der modifizierten Version überschrieben. Ich bin jetzt todesverachtend hingegangen und habe den 3ten Knoten ebenfalls...
  2. M

    Separates Netzwerk für Clusterkommunikation

    Den Eintrag habe ich auf der Seite auch gesehen. Ist die Reihenfolge (s. u.a. Eintrag der /etc/hosts) relevant? Ich kann jedenfalls mit dem angegebenen Eintrag ohne Schwierigkeiten eine ssh-Verbindung zwischen den beiden Hosts aufbauen. lt. corosync.conf: ring0_addr: coro-pvecl01 Zeile in der...
  3. M

    Separates Netzwerk für Clusterkommunikation

    Danke für die schnelle Rückmeldung hier die corosync.conf: logging { debug: off to_syslog: yes } nodelist { node { name: pvecl03 nodeid: 3 quorum_votes: 1 ring0_addr: coro-pvecl03 } node { name: pvecl02 nodeid: 2 quorum_votes: 1 ring0_addr...
  4. M

    Separates Netzwerk für Clusterkommunikation

    Hi, nach dem Versuch die Kommunikation auf meinem 3er-Cluster gemäß der Beschreibung https://pve.proxmox.com/wiki/Separate_Cluster_Network in der einfacheren Variante OHNE "redundant ring protocol" aufzusetzen, steht alles. Nachfolgend die durchgeführten Schritte: /etc/pve/corosync.conf.new...
  5. M

    Proxmox cluster on a shared SAN storage

    Jeep, that was helpful. Thought "-c" had to be set to share the storage with the other nodes. So it's "just": - Baseinstallation - Install multipath to recognize the SAN-Volumes on all nodes (apt-get install multipath-tools) - setup the Cluster pvecm create ..... pvecm add .....) - Setup...
  6. M

    Proxmox cluster on a shared SAN storage

    Training was held by an official Partner. Exhibition accompanied by some Proxmox-Guys in Germany. Back to Topic. Deleted the logical volume. Disabled services for dlm and lvm2-cluster-activation. Enabled lvm-activation service. Unloadel modul dlm. Changed locking_type in /etc/lvm/lvm.conf...
  7. M

    Cluster mit angehängtem SAN

    Hatte ja auch "versucht" meine Lösung in beiden Sprachen zu kommunizieren (anderer Stelle trat schon "Unmut" mit dem Hinweis auf, dass es extra ein deutsches Forum gibt, wo man doch von allen im IT-Umfeld arbeitenden Werktätigen englische Sprachfertigkeiten erwarten könne ... ;-) Dem stimme ich...
  8. M

    Proxmox cluster on a shared SAN storage

    Thank you for the hints. I'll try to attach the shared SAN without the additional Stuff just via the Web-GUI. The above mentioned Setup came up because I received the Answer twice, during a Training and a Exhibition that SAN wouldn't be supported. The use of CEPH woud be prefered..... Although...
  9. M

    Cluster mit angehängtem SAN

    Danke für die Hinweise. werde also versuchen die SAN-Anbindung ohne die zusätzlichen o.a. Schritte über die Web-GUI zu realisieren. Die eingangs erwähnte Einrichtung hat Ihren Ursprung im Umstand, dass ich in einem Training und auch auf Nachfrage auf einer Messe die Aussage erhielt, SAN würde...
  10. M

    Proxmox cluster on a shared SAN storage

    So the only thing is to setup the Physicalvolume, Volumegroup and Logicalvolume for the SAN-Volume on one of the nodes and then just add it as LVM Storage in the Web-GUI?
  11. M

    Proxmox cluster on a shared SAN storage

    Where is the feature hidden? Directly use LVM within the WEB-GUI?
  12. M

    Cluster mit angehängtem SAN

    Weshalb nicht? ;-) Spaß beiseite. In der Dokumentation zu Proxmox habe ich wenig zu Möglichkeiten hinsichtlich der direkten Anbindung von SAN-Speicher gefunden. Da meine Knoten wenig lokalen, dafür aber ausreichend SAN-Speicher haben, wollte ich diesen als "shared Storage" im Sinne von zentralem...
  13. M

    Cluster mit angehängtem SAN

    Kurze Info zu meiner Umgebung vorab. Ich nutze aktuell keine HA-Features für die auf den Knoten laufenden VMs. Meine Zielsetzung war lediglich ein gemeinsames Volume auf einem vorhandenen SAN zu nutzen, wobei die Migration (online und offline) manuell durchgeführt werden sollte. Mit den...
  14. M

    Proxmox cluster on a shared SAN storage

    Just some brief Information concerning my environmental needs before. I don't use the HA-Features for VMs running on the nodes. My goal was just having a shared SAN-Volume to perform manual migration (online and offline). I performed the following steps to get my 3-Node-Cluster up and running...
  15. M

    mirror enterprise repository on site

    Yes, already bought 2 Commercial Support Subscriptions, additional 3 are on their way through the buying department, further extension already planned. I already use a local mirror (package apt-mirror) for Debian, Ubuntu,..

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!